Hi,
I purchased a 1965 Mustang Coupe last summer and am wanting to swap out the 289 in it for a 351. It has the factory C4 transmission in it, which runs great. However, I have heard conflicting things with regards to this swap. I know that there are a few things that will need replaced with this swap, such as swap headers, radiator, 1966 motor mounts, and I'm sure there are a few other things that I don't know about. I have read conflicting reports on whether the c4 will bolt up to a 351 windsor, is there a certain year of blocks that will bolt up or not? Also forgive me because I am completely new to engine work, but am very eager to learn. I also have a good friend that will help with most of the work I will be doing unfortuantely he works primarily on Chevys. So I was just wondering the basics about the swap. Any and all help would greatly be appreciated, I'm not trying to build the car for the strip, just want a nice streetable engine putting out around 350 hp, and around that in torque if thats possible with the c4. Also I'm open to suggestions on whether to buy a crate engine or one thats for sale elsewhere that I can build up. I'm not trying to throw money away and would like to do it as affordable as possible.
p.s. I am looking at this engine as a possibility,
1973 Ford 351 Windsor 375 Hp
Is this a good deal if I can get receipts for the machine work? It doesn't come with a distributor or air filter, but it has a brand new alternator that will come with it.
Thanks
I purchased a 1965 Mustang Coupe last summer and am wanting to swap out the 289 in it for a 351. It has the factory C4 transmission in it, which runs great. However, I have heard conflicting things with regards to this swap. I know that there are a few things that will need replaced with this swap, such as swap headers, radiator, 1966 motor mounts, and I'm sure there are a few other things that I don't know about. I have read conflicting reports on whether the c4 will bolt up to a 351 windsor, is there a certain year of blocks that will bolt up or not? Also forgive me because I am completely new to engine work, but am very eager to learn. I also have a good friend that will help with most of the work I will be doing unfortuantely he works primarily on Chevys. So I was just wondering the basics about the swap. Any and all help would greatly be appreciated, I'm not trying to build the car for the strip, just want a nice streetable engine putting out around 350 hp, and around that in torque if thats possible with the c4. Also I'm open to suggestions on whether to buy a crate engine or one thats for sale elsewhere that I can build up. I'm not trying to throw money away and would like to do it as affordable as possible.
p.s. I am looking at this engine as a possibility,
1973 Ford 351 Windsor 375 Hp
Is this a good deal if I can get receipts for the machine work? It doesn't come with a distributor or air filter, but it has a brand new alternator that will come with it.
Thanks