1970 351w heads on 5.0?

[Brandon11010]

I got ahold of a set of 1970 351 heads with a fresh valve job with 1.91, 1.61 valves, for free so i was wondering how they would work on my 5.0 with an e303 cam, bbk shortie headers, cobra intake, and 70mm throttlebody, or would i have problems

 

[Modular2v]

it will be a nice kick in the pants. . . im using c9 heads on my 331 and have gone 11.45@126

 

[Brandon11010]

just what im looking for, so it shouldnt be a prob just bolting on 351 heads on a 302

 

[z2o_what]

they bolt right on, but i think there might be an extra bolt hole on 351 heads(i'll have to look) , i have a set of d0oe 351 heads that im prolly gonna use on my new engine

edit: they do have a extra bolt hole, just dont use that hole

 

[Anaconda]

Not sure if it will work. I have a set of 69 high performance 390 heads, will these bolt up to a 5.0 w/B-cam, shorties 70mm throttle body, & cobra intake? These heads are just sitting on the shelf in Dad's garage. I was told I could have them, but need to know if they will work. Thanks in advance.

 

[z2o_what]

Not sure if it will work. I have a set of 69 high performance 390 heads, will these bolt up to a 5.0 w/B-cam, shorties 70mm throttle body, & cobra intake? These heads are just sitting on the shelf in Dad's garage. I was told I could have them, but need to know if they will work. Thanks in advance.

a 390 is an FE engine (different type block than 302) and im pretty sure they won't work.

 

[Modular2v]

Not sure if it will work. I have a set of 69 high performance 390 heads, will these bolt up to a 5.0 w/B-cam, shorties 70mm throttle body, & cobra intake? These heads are just sitting on the shelf in Dad's garage. I was told I could have them, but need to know if they will work. Thanks in advance.

390 is a totally different style motor