1970 Mach 1 voltage regulator

1970 Mustang mach 1 cranks and runs but at low rpm sounds like it's running on less than eight cylinders, But, when given a little gas it seems to run smoothly. The timing and the carb has been eliminated as a potential problems. The wiring and plugs have been examined and checked, Since the problem seems to be associated with engine rpm could it be the alternator or voltage regulator be the problem. Any thoughts or suggestions from anyone who has experienced a similar problem would greatly appreciated,
 
Pull your plugs, number them, take really good images of them and post them here.

Also: Start it up late at night in a dark place. Let it full warm up if you can. Look for lightning.

Those Pertronics boxes are hard on stuff. I ran one NA on my 86 years ago. Worked great but ate plugs, wires, and boots. I was under the impression that I needed something hotter than OEM. Not the correct move in my case. The crux of all of that is that the box itself is suspect. How old is it?

It may be time to look for new one.
 
  • Like
Reactions: Mcmahst