Ok, guys! I am new at this (first mustang). I have a 1988 Notchback 5.0, 5-speed. I recently removed my dash to paint and clean it up. In the process of putting it back together, the wires going to the hazard switch come out. I tried to figure out what order they plug back into the switch. I had no turn signals at first, but as I changed the wires around, I got the signals to work. but when I turned the key forward to start the vehicle, It will not start. The fuses are all in tact. I need to figure out in what order the wires go back into the plug. Hope somebody can help, Thanks!