• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

1989 Gt Half Throttle Stumbles And Chokes After New Exhaust

  • Thread starter Thread starter jimvanderl
  • Start date Start date Apr 23, 2014
J

jimvanderl

New Member
Apr 23, 2014
1
0
2
Apr 23, 2014
#1
  • Apr 23, 2014
  • #1
My friend bought a 1989 5.0 GT. It had no cats just a pipe to a pro chamber and 2 stub exhaust pipes. The engine is stock. It ran great when he brought it home. Then he had a new exhaust system put on, they "forced" him to put cats on. As he drove away from the shop he found the engine won't run at over 1/4 to 1/2 throttle. At rest it will rev free if you just roll on then seems to choke at about 1/2 throttle. If you are driving and the engine has to pull a load, it dogs out about 1/4 throttle.
We are sure its related to the exhaust but not sure where to start. It was built with cats so why isn't running right? Its back to stock, new plugs, wires, etc. we disconnected the battery for a while to see if the ECU would reset but no change. No codes. Any ideas out there?
 
Last edited: Apr 23, 2014

7991LXnSHO

wanna catch the space herp
10 Year Member
Sep 1, 2010
7,387
2,745
194
Kearney, NE
Apr 23, 2014
#2
  • Apr 23, 2014
  • #2
Not even a code 11? The koeo koer tests should give some response, even if it is just the All OK code.
 

gearheadboy

15 Year Member
Jan 15, 2003
1,425
177
84
Greencastle Pa
Apr 24, 2014
#3
  • Apr 24, 2014
  • #3
Unhook exhaust at headers and see if it is fixed. If not or before that try a light tap on the top of the TPS sensor. I had one act similar once with a bad TPS.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 24, 2014
#4
  • Apr 24, 2014
  • #4
7991LXnSHO said:
Not even a code 11? The koeo koer tests should give some response, even if it is just the All OK code.
Click to expand...
You got some good advice here and it is the first thing to do....
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Apr 24, 2014
#5
  • Apr 24, 2014
  • #5
Welded exhaust i assume?

Possible if the batt wasn't disconnected some damage was done to the ECU
 
You must log in or register to reply here.

Similar threads

M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
594
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
842
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
380
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
G
2006 Mustang GT o2 Sensor Wiring Issue Car Bogging/Choking
  • GCantero93
  • Sep 5, 2025
  • 2005 - 2009 Specific Tech
Replies
4
Views
1K
2005 - 2009 Specific Tech Sep 6, 2025
Noobz347
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?