Hi Everyone, I have a problem with the top on a 1991 convertible 5.0. The emergency light is On(it was not at first but we cleaned the contact, The top moves up and down with a jumper box- with wires going straight to the motor plug-with it unpluged, but when pluged up the top with not move with the switch. We get power to the selenoids because we can hear them clicking, I also bought new selenoids to see if that was the problem, no such luck, still clicking at the selenoids and the top will not move? Can anyone give advice on this , what is probably a simple problem, we can not figure out? Thank you in advance!
1991 Convertible Problem-help!
- Thread starter Coy
- Start date
-
Sponsors (?)
curtisboytejr
Member
- Mar 15, 2009
- 33
- 0
- 7
Have you checked the voltage to the switches to see if you are getting the correct voltages. Let me know what you find. I have a ford repair manual and i can help you if you need it. [email protected]
This is a troubleshooting problem and not an ECM tuning problem.
Thread moved to 5oh Technical Forum.
Thread moved to 5oh Technical Forum.
Similar threads
