Engine 1991 Ford Mustang LX 5.0 Broken Vacuum Wires Need Part Numbers

General karthief said:

I thought the part numbers were BLACK for the black one and WHITE for the white one.
We are talking about vacuum wires right?
Damn that lights flash'n again, gotta get that fixed.

Click to expand...

For people in the future that need help with vacuum lines on a Ford Mustang, I got a great answer from a knowledgeable Mustang owner that isn't a comedian and genuinely wants to help.

He said:

"If they're not sold out of it,Autozone sells vacuum lines, the hard nylon vacuum tubing in a few different sizes. Our Foxbodys use either 1/8 or 5/32 tubing.It comes in a package,either in the help section or behind the counter where the spools of rubber hose sits.The package comes with a 3' roll of tubing.The part numbers are listed below.

If you pull the vacuum nipple/elbow off the end of the oem vacuum hose (where the hose connects to the vacuum fitting on the egr valve,intake,fpr,etc,etc) you'll notice the hose end has a raised ridge on it.This prevents the vacuum nipple from pulling off the hose easily.IOW- it keeps the nipple attached to the hose.If your vacuum nipple is loose on the hose,with the new tubing,you can put heat shrink tubing over the hose & nipple to keep them locked together. AZ should have this too.

5/32= #47418
1/8= #47417 "