• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

2 problems the same day....

  • Thread starter Thread starter MarcoCapone
  • Start date Start date Jul 30, 2007

MarcoCapone

Member
Aug 6, 2003
44
0
6
Jul 30, 2007
#1
  • Jul 30, 2007
  • #1
Here I go, first this morning while going to work I've notice that my ((ABS)) light turned on and that my traction control stay off (I cant put it back to on anymore)... Second problem, sometimes when I come to a stoplight my rpm drop ways too low (under 500) and the engine stall...I had notice since sometime that my motor was strumbling a little bit at idle, but I have no CEL! Anyways hope you can help me with these!!!


P.S.: I have washed my motor 2 days ago could it be the origin of my problem????
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Jul 30, 2007
#2
  • Jul 30, 2007
  • #2
the washing of your motor could be the problem, but I doubt it. Try cleaning the IAC valve with some brake or carb cleaner and see if that helps.

the abs light is on probably because you need a new abs module. if you decide to replace the abs module, you're going to get raped at a shop. they'll easily charge $500+. i'd recommend finding one online for around $100 and doing the work yourself. just make sure you get the abs module for GTs with traction control. your traction control will be off while the abs light is on.
 

MarcoCapone

Member
Aug 6, 2003
44
0
6
Jul 30, 2007
#3
  • Jul 30, 2007
  • #3
And where is the ABS Module? Maybe I did something wrong and water got inside the module?
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Jul 30, 2007
#4
  • Jul 30, 2007
  • #4
heres what it looks like:

http://cgi.ebay.com/ebaymotors/99-0...ryZ33560QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

its in between the engine and the radiator, down low. trying to find a pic for you real quick...
 

Skud

Member
Sep 10, 2003
493
0
17
Saskatchewan
Jul 30, 2007
#5
  • Jul 30, 2007
  • #5
It could also be as simple as a faulty ABS sensor too.. I think ABS systems have separate codes from the regular computer, but I may be wrong..

Riley
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Jul 30, 2007
#6
  • Jul 30, 2007
  • #6
streetstang03 said:
the washing of your motor could be the problem, but I doubt it. Try cleaning the IAC valve with some brake or carb cleaner and see if that helps.

the abs light is on probably because you need a new abs module. if you decide to replace the abs module, you're going to get raped at a shop. they'll easily charge $500+. i'd recommend finding one online for around $100 and doing the work yourself. just make sure you get the abs module for GTs with traction control. your traction control will be off while the abs light is on.
Click to expand...

What leads you to believe that he needs a ABS module??? very rarely have I seen abs modules go. Most of the ones that do go are on windstars. 9-10 ABS problems are sensor or wiring related.

there are thousands of other things that can cause the ABS light to be on and the traction control to be inactive.

bad sensors, bad wiring, bad tone rings, blown fuses many many others too. He needs to bring it to a shop that has a real scan tool that can access the abs module. If he can get the codes then we can help him on here.

Sure it COULD be the abs module but we have no codes here and no pinpoint tests were performed on this car, so what you are suggesting is throwing parts at it.
 
G

GettinThere

Member
Jul 29, 2005
553
1
19
Central Texas
Jul 30, 2007
#7
  • Jul 30, 2007
  • #7
MarcoCapone said:
Here I go, first this morning while going to work I've notice that my ((ABS)) light turned on and that my traction control stay off (I cant put it back to on anymore)... Second problem, sometimes when I come to a stoplight my rpm drop ways too low (under 500) and the engine stall...I had notice since sometime that my motor was strumbling a little bit at idle, but I have no CEL! Anyways hope you can help me with these!!!


P.S.: I have washed my motor 2 days ago could it be the origin of my problem????
Click to expand...

If both of these problems started after you washed your engine, then yes, the wash was the origin of the problems.
 

MarcoCapone

Member
Aug 6, 2003
44
0
6
Jul 30, 2007
#8
  • Jul 30, 2007
  • #8
I Have an appointment at my Ford dealer in 3 days.... We'll see what they tell me... Any Idea about my motor problem?
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Jul 30, 2007
#9
  • Jul 30, 2007
  • #9
if you go to autozone, they'll pull the codes for free; some repair shops will do free diagnostics as well. get some codes and post them up.

svttech76: abs module came to mind since he said he washed his car the other day. my understanding with the Ford abs light was that if it comes on and stays on during start-up, its usually a hardware failure, not loss of signal from a sensor. if the light comes on after start-up, its likely a sensor.
 
G

gotchopsticks

Member
Sep 4, 2004
315
0
16
Jul 31, 2007
#10
  • Jul 31, 2007
  • #10
the same thing happened to me, and i discovered that my positive wire on the battery had come loose. try cleaning the connection and re-install.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jul 31, 2007
#11
  • Jul 31, 2007
  • #11
My ABS light comes on when my drivers side rear wheel speed sensor gets loose. I remmeber looking at it now long after I bought it and noticed it didnt have a bolt holding the sensor on like the others.
Apparently Ford forgot it . But it only happens every once in a great while and I just pop it back in fully.
So I would suggest checking all 4 wheel sensors first....easy fix if thats the issue.
 

MarcoCapone

Member
Aug 6, 2003
44
0
6
Aug 1, 2007
#12
  • Aug 1, 2007
  • #12
Error Code is C1165 (Rear Right Speed Sensor Open circuit), the sensor is already ordered!!!! Thank god its not the control module!!! Now I have to fix my idle bug!!!
 

kylebgt

New Member
Jul 2, 2007
0
0
0
Aug 1, 2007
#13
  • Aug 1, 2007
  • #13
MarcoCapone said:
Error Code is C1165 (Rear Right Speed Sensor Open circuit), the sensor is already ordered!!!! Thank god its not the control module!!! Now I have to fix my idle bug!!!
Click to expand...

And how much is that gonna run you? Did you try to reset the ecu by unplugging the battery? I bet that would fix it. Also replacing the abs fuse would be the first step if you were having problems with that.
 
T

TenaciousD

Founding Member
Sep 15, 2001
320
0
0
Tampa,Fl
Aug 5, 2007
#14
  • Aug 5, 2007
  • #14
I have the same problem, ABS light on and traction control wont work. took it to the dealership only to find the problem. they said it was the module, any where from $400-800 inc labor to fix depending on the part # which they wont know till they take it off....HA!
im looking for one on ebay but all are w/o traction controll, module masters will rebuild it for $200 i just have to take it off to send it to them or try and find a indipendent shop to take ot off for a fair price?

before i do i will stop by auto zone for a second opinion though....maybe its just the wheel sensor
 
You must log in or register to reply here.

Similar threads

M
3.8 start problems. New edge 2003
  • Mayk.i.
  • Oct 2, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
157
1996 - 2004 SN95 Mustang -General/Talk- Oct 3, 2025
manicmechanic007
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
208
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
B
More Issues With New Edge
  • Blackout67
  • May 3, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
22
Views
708
1996 - 2004 SN95 Mustang -General/Talk- May 11, 2025
Blackout67
B
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
810
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Help Reading CEL Light
  • Mhalc1
  • May 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
830
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2025
Mhalc1
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?