2000 Cobra R Exhaust Tips and Dimensions

missouri_guy197 said:

The steeda kit is the exact same thing as the Borla kit...Borla makes it for Steeda...

Click to expand...

The Holy Cobra said:

Here I am....at it again...

I found a custom exhaust place locally that said he would make some custom tips to put on the end of my Borla side exit exhaust for my Cobra....but there is one problem...he needs to know the diameter, length, and all that jazz about the tips before he can make them. I am totally clueless ( ) besides this picture that I found of the tips: (Link Below In Case Picture Doesnt Show Up)

I was wondering if anybody here owned a 2000 Cobra R and could measure the tips for me to get them made, or if someone has the info stashed away somewhere and would care to share...Any help would be appreciated...

http://www.rsportscars.com/foto/08/mustang_cobrar_exhaust.jpg

Click to expand...

Jpjr said:

Has there been any discussion on a side exhaust for an 03-04 Cobra? That would be sweet...

Click to expand...

race_ne1 said:

If it fits an 01 it should fit an 03-04. So the Borla system would work fine.

CobraSusie, could you measure the oval width of the tip and the height top to bottom? I would be curious to know what the exact dimensions are. Also ground clearance has to be like 4 inches at the most.

Thanks

Sean

Click to expand...

CobraSusie said:

oval width 3 and 3/4
the inside tube is 2 and 5/8

(one inch to the ground effects) the ground clearance is 4 1/2 inches

Let me know if you need anything else

Click to expand...