2001 ford mustang v6 misfire and running lean

Im having some misfire and lean problems 01 mustang v6 looking for a vacuum hose diagram for the hoses behind the passenger strut tower. Misfire in cilynder 3 and running lean. Replaced spark plugs, coil packs, egr vqlve with new gasket, cam shaft position sensor. And have new seal for my injecotrs replaced all this and still cant find the cause i belive its a vacuum leak but would like the diagram for this side so i can know what solenoid i need to replace also im
Running open headers right now because i was sent the wrong midpipe shops wont be open til the rona is over. Not worried about the o2 codes because i know they are disconnected
 

Attachments

  • B37F77EB-49EB-4A51-AE4F-9F263E774D32.jpeg
    B37F77EB-49EB-4A51-AE4F-9F263E774D32.jpeg
    247.1 KB · Views: 121
  • 6394B59F-15B1-45B5-98F1-7550031024FA.jpeg
    6394B59F-15B1-45B5-98F1-7550031024FA.jpeg
    260.6 KB · Views: 116
  • BDBD488C-61DD-44A4-8C24-808D62EB976B.jpeg
    BDBD488C-61DD-44A4-8C24-808D62EB976B.jpeg
    233 KB · Views: 118
  • 8D391418-6D40-4C55-85EF-C57863B6DDAB.jpeg
    8D391418-6D40-4C55-85EF-C57863B6DDAB.jpeg
    236.4 KB · Views: 136
  • Sponsors (?)


This is where they dump
Into i believe its the vacuum pump and solenoids but im not sure any help would be much appreciated thanks in advanced
 

Attachments

  • image.jpg
    image.jpg
    332.9 KB · Views: 164
  • image.jpg
    image.jpg
    232.5 KB · Views: 161
  • image.jpg
    image.jpg
    356.2 KB · Views: 249
Im having some misfire and lean problems 01 mustang v6 looking for a vacuum hose diagram for the hoses behind the passenger strut tower. Misfire in cilynder 3 and running lean. Replaced spark plugs, coil packs, egr vqlve with new gasket, cam shaft position sensor. And have new seal for my injecotrs replaced all this and still cant find the cause i belive its a vacuum leak but would like the diagram for this side so i can know what solenoid i need to replace also im
Running open headers right now because i was sent the wrong midpipe shops wont be open til the rona is over. Not worried about the o2 codes because i know they are disconnected

these never got uploaded but these are the other two codes i solved 3 of them with the cam sensor
 

Attachments

  • 83308F08-8382-4543-BAF8-EB6A5C2910DE.jpeg
    83308F08-8382-4543-BAF8-EB6A5C2910DE.jpeg
    246.7 KB · Views: 112
  • FEE13B39-D2DD-4C4E-8A30-0D4078D7AB25.jpeg
    FEE13B39-D2DD-4C4E-8A30-0D4078D7AB25.jpeg
    236.4 KB · Views: 119