2002 Mustang GT front Camber

[TtOrMaMnY]

i have a question for you guys. i came from the import scene.. in my import car i was able to correct camber wear with a washer trick on the import control arms. i was wondering is there any tricks to correct camber on the mustangs?

 

[stang9300]

There are several tricks you can do such as the washer trick or putting smaller diameter bolts on the shock tower, but you won't pick up much. Maybe 1/4 to 1/2 degree. The best thing if you are lowering it, is to get CC plates. They may be a little more expensive, but they are a permanent fix that allows for alot of adjustment.

 

[TtOrMaMnY]

well the camber isnt bad at all so thats why i was just planning on doing the camber tricks.. do you know of any links that show this washer trick? thanks dude

 

[TtOrMaMnY]

anyone else?

 

[Ghostface]

you can get "camber bolt kits" from NAPA for about 10 bucks each. Much cheaper than CC plates and I assume it'll be more effective than those tricks. Get it installed while your getting your alignment.

 

[mity2]

my Pro3i C/C plate. did me some good
C/C plate

Don't have any pic of it on the car..

 

[TtOrMaMnY]

hey ghostface. and mity can u link me to pics or something? thanks

 

[mity2]

hey ghostface. and mity can u link me to pics or something? thanks

I did?

her is where I got it from
Pro3i C/C plate

 

[TtOrMaMnY]

i mean ghostface and stang