• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

2004 Convertible GT Auto (1st trip to drag strip)

  • Thread starter Thread starter uhoh5.0
  • Start date Start date Jun 29, 2006
  • 1
  • 2
Next
1 of 2 Next Last

uhoh5.0

Founding Member
Mar 14, 2002
354
0
17
Montgomery, AL
Jun 29, 2006
#1
  • Jun 29, 2006
  • #1
Ran my 2004 GT convertible with auto trans in the quarter last night. I had six runs all @ 15.00 I was a little disappointed with that time (alot actually), but the car has zero mods except for a drop in K&N and removed air silencer. Also, it has the factory mach 1000 audio system with two 10 inch woofers and 4 amps in the trunk plus leather, factory radials and me (215lbs )

Just wondered what everyone thought and what it would take to be a solid 13.8 car? Let me know what you think!

Also, my best 60 foot was 2.2 and best reaction was .157 Fifteen flat is slow, but every run was consistent. I also tried to shift a couple of times my self but no better luck.
 

squares98

Member
Aug 20, 2004
852
0
17
Orange,ca
Jun 29, 2006
#2
  • Jun 29, 2006
  • #2
how hot was it, what was the track elevation, barometric pressure, etc. Those factors make a huge difference.
 

propellerhead

New Member
Apr 13, 2004
1,541
0
0
"but what's with the but shots?"
Jun 29, 2006
#3
  • Jun 29, 2006
  • #3
Congrats on your first run. It gets better from here. Don't bother manually shifting your 4-spd auto. It's an electronically controlled transmission. It will shift at the pre-programmed shift points if it's in D. Get a tuner if you want to change the shift points. It will also firm up those shift so you don't waste power with those stock granny shifts. Gears and exhaust will be your finish up your top 3.
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Jun 29, 2006
#4
  • Jun 29, 2006
  • #4
If it was hot and humid, then thats what killed your times.
I went to the track last weekend and it was 85 degrees and 100% humidity . It destroyed my times and everyone else's. My car is a solid 13.8 car on blad street tired, but the humidity and heat killed power and traction even on my new tires
 

triggz

Founding Member
May 15, 2002
1,218
0
37
Gadsden, AL
Jun 29, 2006
#5
  • Jun 29, 2006
  • #5
Lots of room for improvement...
My 2000 auto convertible went as low as 14.1@97 (@ ~1500ft air density) on many many passes, with the only mod being weld-in flowmaster mufflers. That was even with the top down..

What was the air density?
Use this to find the barometric pressure at the time you raced:

http://www.wunderground.com
Enter your zipcode, and scroll down to "History And Almanac". It will tell you the conditions for any time.



http://users.erols.com/srweiss/calcda.htm
Then use this calculator to find out your Air Density in feet. ie. it will tell you that you were basically racing at 3000ft elevation conditions, than just knowing "500ft elevation with crap conditions".



You can then use this NHRA elevation adjustment table to determine your time with better conditions:
http://www.smokemup.com/auto_math/nhra_correction_factors.php
 

'13_ImpactBlue_GT

Angry Little Elf
Mar 30, 2005
872
2
98
Where the men are men and the sheep are nervous
Jun 29, 2006
#6
  • Jun 29, 2006
  • #6
What are your plans: Forced Induction or All Motor?
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Jun 29, 2006
#7
  • Jun 29, 2006
  • #7
4.10s and a chip/tuner will completely change your car. Do those. Not 3.73s - get 4.10s.
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Jun 29, 2006
#8
  • Jun 29, 2006
  • #8
Also, pull the excess crap out of your trunk - spare, jack, carpet, subs etc, oh and the dog bone on the driveshaft is useless weight too.
 

triggz

Founding Member
May 15, 2002
1,218
0
37
Gadsden, AL
Jun 29, 2006
#9
  • Jun 29, 2006
  • #9
007 said:
4.10s and a chip/tuner will completely change your car. Do those. Not 3.73s - get 4.10s.
Click to expand...

+1

Must do mods:
Full length sub-frame connectors, 4.10 gears, transmission cooler, jerry mod, full exhaust, suspension, predator/sct tuner..

The jerry mod will wake your car up so much. I highly recommend it. Your car will snap into gear crisp and firm.
 
T

TGJ

New Member
Mar 30, 2005
1,049
4
0
Jun 29, 2006
#10
  • Jun 29, 2006
  • #10
The J-Mod won't do much on an 04 Tranny though as most of it is already done. I strongly suggest a tuner, and with a tuner, no WOT shifts into OD or you will break that tranny very quickly. I recommend 4.30's with your car.
 

White Stang

Member
Feb 11, 2004
467
0
16
Ft Lauderdale
Jun 29, 2006
#11
  • Jun 29, 2006
  • #11
Anywhere from mid 15's to mid 14's is the norm for stock Stangs here during the hot and humid summer months. The fact that you have a vert and the added weight from the sound system isn't helping you either. If I had a vert I would keep it stock maybe put some 373 gears and Nitrous wet kit on for special occasions That would put you comfortably in the low 13's.
 

FivePointStang

Founding Member
May 22, 2001
147
0
17
Springfield, OH
Jun 29, 2006
#12
  • Jun 29, 2006
  • #12
Im still trying to get out to the track this season. Just curious, for most convertibles isnt there a certain point you have to have a roll bar to even run on certain tracks?
 

uhoh5.0

Founding Member
Mar 14, 2002
354
0
17
Montgomery, AL
Jun 29, 2006
#13
  • Jun 29, 2006
  • #13
That almanac feature is so cool!!! At the time of my runs, it was 80 degrees with 79% relative humidity (it was hot and muggy) and I was at the darlington, sc drag strip.
 

White Stang

Member
Feb 11, 2004
467
0
16
Ft Lauderdale
Jun 29, 2006
#14
  • Jun 29, 2006
  • #14
FivePointStang said:
Im still trying to get out to the track this season. Just curious, for most convertibles isnt there a certain point you have to have a roll bar to even run on certain tracks?
Click to expand...
13.49 and faster and you need a Rollbar
 
0

01Steeda

New Member
May 29, 2005
732
0
0
Baton Rouge, LA
Jun 29, 2006
#15
  • Jun 29, 2006
  • #15
White Stang said:
13.49 and faster and you need a Rollbar
Click to expand...



reaaaly? My track told me 11.5 lol.. but then again they are real slack on the rules other than helmet and fluids on the track.. they bust balls on that.


and as for the topic... that isnt bad considering the auto-heat and first trip. Gears are gonna make the car wake up!!!

I went 14.1 bone stock in my 5sp. but in so-so weather.
 

uhoh5.0

Founding Member
Mar 14, 2002
354
0
17
Montgomery, AL
Jun 29, 2006
#16
  • Jun 29, 2006
  • #16
Well, this is my plan:

I've already ordered the C&L upper inlet pipe (gotta start somewhere )

4.10s (had them in my last car and really made a HUGE difference!)
Predator Tuner (to firm up tranny, timing, shift points, etc.)
UPR X-Pipe
Weld in flowmasters
Nitto 555 drag radials (the stock tires start to break loose at about 1800rpms)
And to round things out, the larger K&N with heatshield from C&L


What are your predictions for the 1/4 mile?

I'm going to guess... 13.8 (hopefully) in good weather???
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Jun 29, 2006
#17
  • Jun 29, 2006
  • #17
uhoh5.0 said:
Well, this is my plan:

I've already ordered the C&L upper inlet pipe (gotta start somewhere )

4.10s (had them in my last car and really made a HUGE difference!)
Predator Tuner (to firm up tranny, timing, shift points, etc.)
UPR X-Pipe
Weld in flowmasters
Nitto 555 drag radials (the stock tires start to break loose at about 1800rpms)
And to round things out, the larger K&N with heatshield from C&L


What are your predictions for the 1/4 mile?

I'm going to guess... 13.8 (hopefully) in good weather???
Click to expand...
its possible, but what im sure of is that the car will sound damn good. I had flows and an x-pipe on my old stang
 
0

01Steeda

New Member
May 29, 2005
732
0
0
Baton Rouge, LA
Jun 29, 2006
#18
  • Jun 29, 2006
  • #18
sry wrong thread DOH!!
 

FivePointStang

Founding Member
May 22, 2001
147
0
17
Springfield, OH
Jun 29, 2006
#19
  • Jun 29, 2006
  • #19
uhoh5.0 said:
Well, this is my plan:

I've already ordered the C&L upper inlet pipe (gotta start somewhere )

4.10s (had them in my last car and really made a HUGE difference!)
Predator Tuner (to firm up tranny, timing, shift points, etc.)
UPR X-Pipe
Weld in flowmasters
Nitto 555 drag radials (the stock tires start to break loose at about 1800rpms)
And to round things out, the larger K&N with heatshield from C&L


What are your predictions for the 1/4 mile?

I'm going to guess... 13.8 (hopefully) in good weather???
Click to expand...


Make sure you run with a near empty tank and maybe bring along a 5 gallon jug with you to have a friend watch. Oh yeah, and dont forget to turn off your traction control
 
C

cronin49

Banned
Aug 12, 2003
432
1
16
SC
Jun 30, 2006
#20
  • Jun 30, 2006
  • #20
triggz said:
Lots of room for improvement...
My 2000 auto convertible went as low as 14.1@97 (@ ~1500ft air density) on many many passes, with the only mod being weld-in flowmaster mufflers. That was even with the top down..

What was the air density?
Use this to find the barometric pressure at the time you raced:

http://www.wunderground.com
Enter your zipcode, and scroll down to "History And Almanac". It will tell you the conditions for any time.



http://users.erols.com/srweiss/calcda.htm
Then use this calculator to find out your Air Density in feet. ie. it will tell you that you were basically racing at 3000ft elevation conditions, than just knowing "500ft elevation with crap conditions".



You can then use this NHRA elevation adjustment table to determine your time with better conditions:
http://www.smokemup.com/auto_math/nhra_correction_factors.php
Click to expand...
Hey bro, where did you run with the top down? I have been to 5 different tracks and all of them said the top has to be up. 3 of them said NHRA rules.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

M
I really wasn't expecting this....... First time Mustang owner.......
  • Mikedd969
  • Nov 27, 2019
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
3K
1996 - 2004 SN95 Mustang -General/Talk- Nov 28, 2019
Mikedd969
M
T
2004 Mustang GT-Mach 460 Component System Replacement
  • the4tun81
  • Nov 9, 2018
  • Mustang Sound & Shine All
Replies
1
Views
10K
Mustang Sound & Shine All Dec 28, 2018
mosesbrodin99
M
J
1/4 Help Please
  • jon94vert
  • Sep 21, 2016
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2016
mikestang63
R
  • Locked
SOLD 1996 Mustang Gt Convertible Pi Swapped
  • RedFord96
  • Mar 2, 2016
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
2K
SN95 Mustangs For Sale (1994-04) Mar 2, 2016
RedFord96
R
9
  • Locked
Expired 1999 35th Ann. Limited Convertible, Supercharged,air Ride, 19k Miles
  • 99white_vert_limited
  • Jul 28, 2016
  • SN95 Mustangs For Sale (1994-04)
Replies
5
Views
5K
SN95 Mustangs For Sale (1994-04) Oct 10, 2016
07SGT1348
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?