• Mustang Forums
  • Special Production

Roush 2005 Saleen Mods

  • Thread starter Thread starter kpribble@terrib
  • Start date Start date May 1, 2005
  • 1
  • 2
Next
1 of 2 Next Last

kpribble@terrib

Member
Apr 3, 2005
63
0
6
May 1, 2005
#1
  • May 1, 2005
  • #1
Ok guys - I have decided to start modding my 05 Saleen.

I plan on starting with the following perf mods but have a couple of issues:

1 - Saleen Series VI S/C @ approx 6 psi like this one
http://www.saleen.com/supercharger.htm Saleen Supercharger

2 - Also a C&L Complete MAF System For 2005 MUSTANG GT liek this one
http://www.cnlperformance.com/2005GT.html C & L CAI Kit

here are my 2 problems

1 - Can anyone recommend someone other than Ford to do the install of the blower

2 - Even though the S/C comes with a new Saleen power flash - I am sure the with the C & L I will need to have a custom tune - I am not sure who to take it to or what type of tuner to use on it - I am pretty sure I will hve to take it to Ford and have the original Saleen tune erased and put back to a stock GT before I start and then take it to someone (maybe Dan and have a custom tune buuilt for it

Any thoughts you might have would be appreciated

THANX
 

00s281sc368

New Member
Dec 14, 2003
532
0
0
Fremont, CA
May 1, 2005
#2
  • May 1, 2005
  • #2
From all choices, the saleen blower is the worst performing blower you ever want to buy for your car...
 
S

saleen065

New Member
Oct 31, 2004
653
0
0
Douglasville, GA.
May 1, 2005
#3
  • May 1, 2005
  • #3
00s281sc368 said:
From all choices, the saleen blower is the worst performing blower you ever want to buy for your car...
Click to expand...


I'm curious, being that this blower setup is a totally new designe system, what do you base your assumption that it would be the worse blower to use? I personally haven't seen any other screw type blowers available for the 2005 cars. Mind you I'm not asking your opinion on the former blowers used on the 2004 and older cars but on the NEW 2005 setup.

Just a curiosity.
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
May 1, 2005
#4
  • May 1, 2005
  • #4
 

lgndracer

New Member
Feb 21, 2004
393
0
0
Sumner, WA
May 2, 2005
#5
  • May 2, 2005
  • #5
There was an article in one of the new mags about a KB for the 2005. Not sure if they are shipping them yet. Might want to check out thier sight.
 

00s281sc368

New Member
Dec 14, 2003
532
0
0
Fremont, CA
May 2, 2005
#6
  • May 2, 2005
  • #6
lgndracer said:
There was an article in one of the new mags about a KB for the 2005. Not sure if they are shipping them yet. Might want to check out thier sight.
Click to expand...

Yes that was in MM&FF last month or so. The 2005 saleen made 450rwhp and about the same torque (almost flat curve from 2000 to 6000rpm ) which makes it a 525HP car
 

Head Paneer

Founding Member
Nov 7, 2001
1,823
0
37
Surf City, CA
May 2, 2005
#7
  • May 2, 2005
  • #7
The previous Saleen systems have certainly had some shortcomings but I have high hopes for the new blower, especially after seeing it at their open house the other week. I think it will prove to be very efficient and have a lot of potential. Intake charge temps are claimed to be down near 120 degrees F. The Series VI will be the same blower offered on the E car but fitted with a smaller pulley.

If I were in your position however, I would wait it out for a while to see how the blowers do on production cars and to see some third party testing. Also, unless you want to keep your car “all Saleen”, the new KB system should be a very nice option.

I wonder if the throttle body lands in a different position within the engine bay and if there might be any alignment issues with the C&L intake pipe.

I don’t know anyone out your way for installation. You could always come back to So Cal and have Chicane do the install. If you time it right, you could participate in the Huntington Beach Concours, June 5th.
 

s351rspeedster

New Member
Mar 12, 2004
787
1
0
Southern California
May 2, 2005
#8
  • May 2, 2005
  • #8
Head Paneer said:
I don’t know anyone out your way for installation. You could always come back to So Cal and have Chicane do the install. If you time it right, you could participate in the Huntington Beach Concours, June 5th.
Click to expand...

I second that motion, Las Vegas is just a short 4 hour drive away (well, 3 and 1/2 the way I drive )
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
May 2, 2005
#9
  • May 2, 2005
  • #9
00s281sc368 said:
Yes that was in MM&FF last month or so. The 2005 saleen made 450rwhp and about the same torque (almost flat curve from 2000 to 6000rpm ) which makes it a 525HP car
Click to expand...


I can't believe I missed that article and I have subscriptions to MM&FF and 5.0. Which month was it in? I don't think anyone has had a chance to test the Saleen blower yet.
 

kpribble@terrib

Member
Apr 3, 2005
63
0
6
May 2, 2005
#10
  • May 2, 2005
  • #10
marcus95 said:
I can't believe I missed that article and I have subscriptions to MM&FF and 5.0. Which month was it in? I don't think anyone has had a chance to test the Saleen blower yet.
Click to expand...

I would like to see that article also if anyone knows which issue it was in??
 

kpribble@terrib

Member
Apr 3, 2005
63
0
6
May 2, 2005
#11
  • May 2, 2005
  • #11
Head Paneer said:
The previous Saleen systems have certainly had some shortcomings but I have high hopes for the new blower, especially after seeing it at their open house the other week. I think it will prove to be very efficient and have a lot of potential. Intake charge temps are claimed to be down near 120 degrees F. The Series VI will be the same blower offered on the E car but fitted with a smaller pulley.

If I were in your position however, I would wait it out for a while to see how the blowers do on production cars and to see some third party testing. Also, unless you want to keep your car “all Saleen”, the new KB system should be a very nice option.

I wonder if the throttle body lands in a different position within the engine bay and if there might be any alignment issues with the C&L intake pipe.

I don’t know anyone out your way for installation. You could always come back to So Cal and have Chicane do the install. If you time it right, you could participate in the Huntington Beach Concours, June 5th.
Click to expand...

I really do want to keep the car "Saleen" if it makes sense - and am hoping to see some 3rd party testing soon but.... I am very impatient (probably why I have a non S/C 2005 already) I do think the throttly body moves slightly and will probably borrow a friends for a test fit prior to purchase. Also I really like the look of the new Saleen as well as new new intake style over the top with the inverted screw. I will have to think about another trip early June that actually may work out if Chicane has room their schedule - anyone know who would be the best persoin to talk to down there??

THANX
 
T

tomabram

Banned
Apr 1, 2005
66
0
0
May 2, 2005
#12
  • May 2, 2005
  • #12
I would wait a little while. Soon everyone will have great blowers for the new Saleen. Bad ass looking car.
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
May 2, 2005
#13
  • May 2, 2005
  • #13
kpribble@terrib said:
I really do want to keep the car "Saleen" if it makes sense - and am hoping to see some 3rd party testing soon but.... I am very impatient (probably why I have a non S/C 2005 already) I do think the throttly body moves slightly and will probably borrow a friends for a test fit prior to purchase. Also I really like the look of the new Saleen as well as new new intake style over the top with the inverted screw. I will have to think about another trip early June that actually may work out if Chicane has room their schedule - anyone know who would be the best persoin to talk to down there??

THANX
Click to expand...


Joe is the only one you want to talk to at Chicane. Also, don't forget about Casey at Haney Motorsports. Case frequents the board here also. He is HMSPORT.

You can wait. I do know exactly what you are talking about though. I purchased 02-340 and N/A car with the specific purpose of waiting for the Series V twin screw AutoRotor. I sold the car a month before it was released.
I'm certain I would have caught an article in any of the mags re: the new blower for the 05 S/C cars. I have been watching like a hawk for it.
If you can hold out you will be happy. If the S/C performs anywhere near the new KB then you can almost add that value onto the top of your car when you sell it.
 
0

00-Saleen

New Member
Sep 2, 2004
588
0
0
Snohomish,WA
May 3, 2005
#14
  • May 3, 2005
  • #14
Wait awhile and look at your options. Local Bickford ford Mercury here in snohomish, Washington just got 5 Supercharger 05 Saleens in and sold 4 of them in one day. The supercharger its self is below the intake manifold which i thought was intersting. The blower pulley is HUGE( probly why tthe car only makes 4Lbs of boost) but still manages a 400Hp ( So Saleen Says). But the New supercharger is Obviosly more efficient than previous blowers.
 
0

00-Saleen

New Member
Sep 2, 2004
588
0
0
Snohomish,WA
May 3, 2005
#15
  • May 3, 2005
  • #15
Heres the only 05 S281Sc left at Bickford after 1 day.

 

00s281sc368

New Member
Dec 14, 2003
532
0
0
Fremont, CA
May 3, 2005
#16
  • May 3, 2005
  • #16
kpribble@terrib said:
I would like to see that article also if anyone knows which issue it was in??
Click to expand...

It's one of the latest issue.
I saw it in the shelves and read the article about 2~3 weeks ago.
 
0

00-Saleen

New Member
Sep 2, 2004
588
0
0
Snohomish,WA
May 3, 2005
#17
  • May 3, 2005
  • #17
I have every issue and i dont see it yet. Ill keep looking.
 
H

HMSPORT

Banned
Mar 30, 2005
60
0
0
May 3, 2005
#18
  • May 3, 2005
  • #18
Mark
Thanks for the plug. We have just sold an 05' s/c to a local customer. I am waiting to here the dyno results.I have talked many times to the man ( I won't give his name) who is in charge of the engine room,which works on both the s/c S281 and the S7. He is very excited about the new blower. Alot of people are wondering why/how they get 400hp from only 5psi. He has explaned to me that using the larger 2300cc blower and the intake design allows for more volume and a straight shot down the intake port. They are testing the S281E right now. Basically the same setup,but with more boost, fuel and forged internals.
p.s.
He claims that the new S7 twin turbo motor at only 5psi
made over 750hp...planning on turning up the boost to make over 1000hp!
 

kpribble@terrib

Member
Apr 3, 2005
63
0
6
May 3, 2005
#19
  • May 3, 2005
  • #19
Thanx for your input everyone - think I will wait for a week or so and see if anyone gets one installed and posts any numbers. Casey - I will try to call you tomorrow to discuss it further
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
May 4, 2005
#20
  • May 4, 2005
  • #20
HMSPORT said:
Mark
Thanks for the plug. We have just sold an 05' s/c to a local customer. I am waiting to here the dyno results.I have talked many times to the man ( I won't give his name) who is in charge of the engine room,which works on both the s/c S281 and the S7. He is very excited about the new blower. Alot of people are wondering why/how they get 400hp from only 5psi. He has explaned to me that using the larger 2300cc blower and the intake design allows for more volume and a straight shot down the intake port. They are testing the S281E right now. Basically the same setup,but with more boost, fuel and forged internals.
p.s.
He claims that the new S7 twin turbo motor at only 5psi
made over 750hp...planning on turning up the boost to make over 1000hp!
Click to expand...



1000 hp??????????

Looks like I have to sell the house. Do you think the wife will mind sleeping in an S7 sitting out in the street?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

S
2005 v6 convertible smj issue
  • shane_steil
  • Jul 1, 2025
  • 2005 - 2009 Specific Tech
Replies
0
Views
127
2005 - 2009 Specific Tech Jul 1, 2025
shane_steil
S
R
For Sale 2008 Mustang Bullitt for sale Richmond Hill, ON, Canada L4C 0S3
  • ROHDRNNR
  • Jun 10, 2026
  • S197 Mustangs For Sale (2005-14)
Replies
0
Views
116
S197 Mustangs For Sale (2005-14) Jun 10, 2026
ROHDRNNR
R
R
New Member, needs help with built '04 engine
  • rollo19
  • Aug 6, 2025
  • The Welcome Wagon
Replies
1
Views
147
The Welcome Wagon Aug 6, 2025
Noobz347
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
128
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
370
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Wednesday at 12:30 PM
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Special Production
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?