Hey guys...On the verge of finally getting my CHP 393 Street Fighter. I was wondering...Will my 24 pound injectors be enough to feed that big of a motor? I'd rather stick with the ones I have than to get new ones. I want to try and keep the cobra stuff and just chip the ecu...Thanks!
I'm not sure, what are the rest of your plans? If you plan on using stock heads and upper intake, 30s would be enough I imagine. You'd probably have to shift it at 5000RPM though.
If you get some AFR185s or better, I would go up to 36#s just to be safe.
Well I believe the longblock comes with the Edelbrock Performer heads. It'll just be a street motor, with a visit to the strip every great once in a while. To go to 36's I just need a new MAF, Chip, and the Injectors right?
There is always a fuel pressure regulator, so as long as you don't buy a gigantic injector, I think you'll be fine with either a 30 or 36. Ask the guys from CHP, they'll know best.