• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

3.35 or 2.95 T5?

  • Thread starter Thread starter bcmbcmbcm
  • Start date Start date Nov 9, 2007
B

bcmbcmbcm

20+ Year Stangneter
Jan 29, 2003
455
0
16
Nov 9, 2007
#1
  • Nov 9, 2007
  • #1
Hey folks,

I am thinking of doing a T5 swap after all. I can't make up my mind! (if I do, someone is gonna get a heck of a deal on my built AOD..)

anyway,

any thoughts on whats better, 2.95 or 3.35?

If I do the math correctly,
won't the .63 overdrive on the 2.95 box cruise at about 7% less rpms than the 3.35 box with the .68 o/d?

I am doing (.68-.63)/.68=7.3%

In my case, I do 2500rpm a 85mph, and 7.3% less would put me at 2320 rpms...I know it is just a couple hundred...and many people here run 3.73 rears, but I like low rpm cruising and this would put lower noise below the drone zone a bit....

But...if it makes for harder starting in 1st...mite not be worth it...as

Please let me know your thoughts!
 

Fast63

New Member
Sep 20, 2007
717
0
0
Nov 10, 2007
#2
  • Nov 10, 2007
  • #2
What do you have, a 3.27 rear end gear ratio? My T-5 has the 3.35 first gear, and I run 3.45's in the rearend, and first gear is too high of a ratio (common term lower gears). So first gears runs out of steam too fast for me and I can't get as much traction, plus it is a little annoying only using first gear when you are absolutely stopped. Then the jump to 2nd is a big stretch, if I shift at 5500, I am looking at 3250 when I'm in second. My advice is to go with the 2.95 geared tranny with the lower rpm overdrive. First gear will definitely not be bad at all at 2.95
 
B

bcmbcmbcm

20+ Year Stangneter
Jan 29, 2003
455
0
16
Nov 10, 2007
#3
  • Nov 10, 2007
  • #3
yes 3.27

sorry should be in my sig!
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Nov 10, 2007
#4
  • Nov 10, 2007
  • #4
when i was running N/A i loved my 2.95 gearset

the OD was great. with 27" tall tires, 3.90s i am only turning 2000 RPM at 65 mph.

i could get first gear to hook alot easier.

there were no negative aspects of the 2.95 gearset at all i would highly reccomend it.
 
M

Makdaddymac

New Member
May 28, 2005
323
1
0
orlando
Nov 10, 2007
#5
  • Nov 10, 2007
  • #5
what aod do you have(im interested)
 
L

lang williams

New Member
Jun 11, 2003
567
0
0
cleveland, oh
Nov 10, 2007
#6
  • Nov 10, 2007
  • #6
i thought i read somewhere that the 3.35 gear is weaker than the 2.95. if so, that might be another consideration.
 
B

bcmbcmbcm

20+ Year Stangneter
Jan 29, 2003
455
0
16
Nov 10, 2007
#7
  • Nov 10, 2007
  • #7
Lentech (locally built) with edge converter

Makdaddymac said:
what aod do you have(im interested)
Click to expand...

It has less than 5k miles on it since the rebuild. A local shop which I know personally in Anaheim, CA rebuilt it with Lentech parts (their rebuild kit) and street terminator v/b (with electric o/d delete). I also have the fancy a$$ fabricated pan that cost $200 alone, and also an edge converter (lockup) Runs great, I am recluctant to tear it out as one can imagine! I bought the rebuild kit from lentech, I think this was $600 alone just for clutches, seals, etc, I forgot all the differences between an el cheapo kit but when I had it build Len convinced me it would be better. I filled it with Amsoil synthetic ATF at rebuild time and I have an aftermarket cooler which I bought from Len too that fits the fox real nicely. I even bought a new pump from Ford even though I didn't need it. The core was the original one and only had about 50k on it.
its a real sweet setup I just like f&Cking around with cars....
 
You must log in or register to reply here.

Similar threads

Drivetrain 5th Gear Ratio
  • PonyGTrider
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
999
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
Q
C
Suggestions for rear diff gears - 1969 Mach 351W 4v
  • cfauvel
  • Apr 8, 2024
  • Classic Mustang Specific Tech
Replies
10
Views
2K
Classic Mustang Specific Tech Jun 27, 2024
cfauvel
C
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
530
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
1
Views
570
Drivetrain Parts Dec 26, 2025
AeroCoupe
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Sunday at 3:20 PM
GearHeadGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?