• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

3 inch exhaust solve problem?

  • Thread starter Thread starter Djstorm100
  • Start date Start date Sep 16, 2007
D

Djstorm100

Member
Aug 5, 2007
109
0
16
Sep 16, 2007
#1
  • Sep 16, 2007
  • #1
93 ls votrech, fully built motor. Ross pistion egale rodes 8.5:1, Elbrock heads, Eledbrock RPM II manfiold, Custom comp cam ect ect... You get the idea


well from 1-2.500 or even 3 rpm the car goes but once I hit past 3k it just hauls ass and breaks the tires loose ect ect.

I dont have a MSD Boost retard timing. So I'm thinking that since timing was taken out that was the problem. So I'm thinking If I put that MSD Boost retard box and get it retune that will solve my problem?


Also 1-3 gear I dont really get in to "vac" maybe 5 or so but at times my car is idling or is in boost. Just a few PSI like 1-2, barley pass the Zero mark. It is a electric gauge autometer. I got under the hood and saw the vaccum line was pretty long so I shorted it up. In 4-5 gear I can get in to vac just cruising The brakes work fine too.

Discuss please
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Sep 16, 2007
#2
  • Sep 16, 2007
  • #2
I'm trying to figure out what a 3 inch exhaust has to do with this post.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Sep 16, 2007
#3
  • Sep 16, 2007
  • #3
I'm also wondering what a 3" exhaust has to do with the issue you're having? Depending on the specs of your cam, that could very much have an impact on your power coming in after 3k. My TFS stage 1 cam is like that as well, in the fact that it doesn't make very much low end power at all, but after 3 grand, it pulls all the way to the 6250 redline. Your cam could also have a dramatic effect on the vacuum you pull at idle/part throttle. You'll pretty much always be making boost with a centrifugal supercharger, as long as it's spinning.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Sep 17, 2007
#4
  • Sep 17, 2007
  • #4
First off, let me just say that may have been one of the most confusing posts i have ever read. No, you shouldn't always be making boost. Centri blowers dont really start making boost until 3k rpms...which is why your car seems to come alive at that speed. Secondly your cam has a huge effect on your powerband. My car is also gutless below 2k rpm...and doesn't really wake up until 3k. The real question here is why arent you making more vacuum than that. i pull anywhere from 12-16" while cruising and between 12-14" when idling. I think you should be seeing more vacuum at least while cruising. Have you thoroughly checked for vacuum leaks? And how does the 3" exhaust question come into play here?
 
D

Djstorm100

Member
Aug 5, 2007
109
0
16
Sep 17, 2007
#5
  • Sep 17, 2007
  • #5
My exhaust on the car now is 2.5 OD. I have bbk long tubs (forgot the size) I was thinking maybe the exhaust was restricting me. Before I got in to mustangs, I was in to imports. I built many imports and still have a few of them. Point is we would throw 3 inch exhaust on imports that ha da decent size turbo or supercharger. I remember on car that I built would not have any real power untill 3k's come to find out after throwing on a 3 inch exhaust, it solve the problem. It was a certi supercharger as well, not a root or twin screw.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Sep 17, 2007
#6
  • Sep 17, 2007
  • #6
If the exhaust was restricting you, you would feel it up top. And no it isn't restricting you

3 inch should really be looked upon in the 500-550+ range in my opinion, if that.

Your 2.5 inch exhaust will go a long way.

So did you call Comp and they made you a cam for the 302/306 with those heads and boost numbers in mind?
 
D

Djstorm100

Member
Aug 5, 2007
109
0
16
Sep 17, 2007
#7
  • Sep 17, 2007
  • #7
yes they did
 

Shamus O'toole

New Member
Jul 3, 2007
18
0
0
Florida
Sep 17, 2007
#8
  • Sep 17, 2007
  • #8
Djstorm100;711151I was in to imports. I built many imports and still have a few of them. Point is we would throw 3 inch exhaust on imports that ha da decent size turbo or supercharger. I remember on car that I built would not have any real power untill 3k's come to find out after throwing on a 3 inch exhaust said:
seems the import crowd puts 3 inch pipes on everything from stockers to so called built motors. The small import motors make no torque and they make there HP at a higher RPM. So a 3 inch pipe will work ok on them. 2.5 inch on your stang will be fine.

P.S. Welcome to the real car world............
Click to expand...
 
D

Djstorm100

Member
Aug 5, 2007
109
0
16
Sep 17, 2007
#9
  • Sep 17, 2007
  • #9
ricers put 3inchs on them and call it a built motor and then watch them pull 17 quater passes. I on the other hand actually build the motor



P.S. Thanks...
 
You must log in or register to reply here.

Similar threads

Forced Induction Total Timing under boost
  • Dontknowchit
  • Aug 27, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
430
Fox 5.0 Mustang Tech Aug 28, 2025
Dontknowchit
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
850
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
797
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?