• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

3 Valve exhaust vs. 2 Valve exhaust....Help

  • Thread starter Thread starter tucker-tx
  • Start date Start date Mar 5, 2006

tucker-tx

New Member
Jun 30, 2004
25
0
0
DALLAS, TEXAS
Mar 5, 2006
#1
  • Mar 5, 2006
  • #1
Okay, this is my first post concerning my 05 GT. Long story short, I had an 04 GT with a Mac o/r H pipe and 2 chamber Flowmaster 40 series mufflers and it sounded absolutly WONDERFUL. So having run this setup previously, I figured it would sound just as good if not better on my 05, not the case. Right now I'm running a Pypes o/r H and 40 series Flows and it doesn't sound bad, but just nowhere close to my 04. The 04 had lots of throat and growl and you could here it a mile away, the 05 has some growl but just doesn't compare at all, it sounds hollow, like it's missing something. Anyone that's heard a 2 valve with the setup I mentioned will know the sound I'm talking about, and I want that sound for my 05. My questions are:

1. Why is the sound on the 3 valve so much different than the 2 valve?
2. Should I use a different muffler?
3. Would Long Tube Headers give me more throat and growl?

Any thoughts, opinions or facts would be greatly appreciated.

Thanks
 

Pliskin

New Member
Jul 27, 2004
109
0
0
Mar 5, 2006
#2
  • Mar 5, 2006
  • #2
I know what you mean man. For some reason I'm seeing the 2v's sounding mean. I want that sound too on my Stang. the headers should make a difference. I'd either do that or switch out mufflers.
 
1

1fastz

Member
Sep 30, 2005
124
0
16
Mar 5, 2006
#3
  • Mar 5, 2006
  • #3
tucker-tx said:
Okay, this is my first post concerning my 05 GT. Long story short, I had an 04 GT with a Mac o/r H pipe and 2 chamber Flowmaster 40 series mufflers and it sounded absolutly WONDERFUL. So having run this setup previously, I figured it would sound just as good if not better on my 05, not the case. Right now I'm running a Pypes o/r H and 40 series Flows and it doesn't sound bad, but just nowhere close to my 04. The 04 had lots of throat and growl and you could here it a mile away, the 05 has some growl but just doesn't compare at all, it sounds hollow, like it's missing something. Anyone that's heard a 2 valve with the setup I mentioned will know the sound I'm talking about, and I want that sound for my 05. My questions are:

1. Why is the sound on the 3 valve so much different than the 2 valve?
2. Should I use a different muffler?
3. Would Long Tube Headers give me more throat and growl?

Any thoughts, opinions or facts would be greatly appreciated.

Thanks
Click to expand...

the 05 cats are HUGELY sound absorbant for some reason as soonj as i went to long tubes with no cats OMG my car is is loud and mean sounding when your on it.

also the cam profiles and the exhaust valve design change the dynamics of the exhaust pulse so no mater what you do it will never sound just like a 2 valve.
 

Mossberg

Active Member
Jul 21, 2003
0
1
36
ATL, Shawty
Mar 5, 2006
#4
  • Mar 5, 2006
  • #4
I too have noticed the extreme differences in exhaust note from the 3v to the 2v with the same setup. I prefer the 2v or 4v sound.
 

REDFIRE 05 GT

New Member
Nov 18, 2004
283
0
0
Junction City KS
Mar 5, 2006
#5
  • Mar 5, 2006
  • #5
http://www.brenspeed.com/info/soundfiles.html

Yea listen to these, there are alot of different sounds to the 3v motor. I think the off road H pipe and Flows is the way to go.
 

tucker-tx

New Member
Jun 30, 2004
25
0
0
DALLAS, TEXAS
Mar 5, 2006
#6
  • Mar 5, 2006
  • #6
Thanks for all the input guys...the way it sounds now with the o/r H and the flows is good, just not the same. I can learn to live with that. However today I was messing around with the H pipe because of a small exhaust leak and decided to see what she would sound like wide open straight out of the H, and Oh My God!!!! It was insane, loud and quite comparable(in terms of growl and throat) to my last 2 valve. I'm seriously thinking about getting some electric cutouts just for fun...and cruising around and stuff. So thanks again for all the comments.
 
T

thump_rrr

New Member
Nov 25, 2004
220
0
0
Montreal, Canada
Mar 5, 2006
#7
  • Mar 5, 2006
  • #7
The longtubes definitely help deepen the sound. I'm running the JBA Longtubes with catted H-pipe and stock mufflers. If I want to go with a deeper, louder sound I'll be going with the Borla Stingers or the Steedas which are made by Borla.
 
You must log in or register to reply here.

Similar threads

New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
140
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
417
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
447
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
556
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?