302 cam

  • Sponsors (?)


i know that it's a flat tappet
but i didn't know that my motor is roller so i bought a flat

so i can't use this ?

what is the info that you can tell me about the stoke cam ?
the only number that i seen about him is 1230317 and in anther place the latter "a"
 
I am having a hard time understanding you, but, no you cant use the cam. try to sell it and get a stock H.O cam. If you have the money upgrade to a set of e7 heads or better too.
 
Are you trying to say you want to know if a flat tappet cam and lifter set will work in your engine? If so, it will, but you will need new pushrods that are the proper length. But you would be better off with what stykthyn said and get a stock H.O. roller cam.
 
A flat tappet cam can be used in a roller block, as Fast63 stated, but if you're planning on using it with EFI, it'll be a no-go. It has the wrong firing order. That cam will have the 302 non-HO firing order. You need the 302HO/351W firing order.