• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

306, Vortech 5psi HELP

  • Thread starter Thread starter nos90gt
  • Start date Start date Feb 22, 2008
N

nos90gt

New Member
Nov 30, 2003
70
0
0
Central FL
Feb 22, 2008
#1
  • Feb 22, 2008
  • #1
My buddy has a 302 .30 over afr 185's Vortech 5psi supercharger. 30lbs inj. fuel pressure with vac. line off in 40. Has a 255 fuel pump. FMU. Timing is set to 10' .The car will not idle for ****. TPS is set at .99. Base idle is around 800rpm. Idle starts surgeing up and down then shuts off. Driving the car and coming to a stop the car with die unless giving it some gas then it will smooth out for a min. Any idea's? Does he also need bigger injectors? Maybe 42's? Thanks for any help.
 

mustangfan1990

New Member
Jul 17, 2005
505
1
0
Lenoir, North Carolina
Feb 22, 2008
#2
  • Feb 22, 2008
  • #2
lol welcome to my world bud. I have a 302 and my boost went from 8 psi to 5 psi. Your timing and TPS is all the same as mine. My car idles like ****, but when I am driving I come to a stop it does fine. Mine just does it when the motor is cold. I would try a new idle air control valve on your car. That somes is often overlooked
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Feb 23, 2008
#3
  • Feb 23, 2008
  • #3
get your base idle setup to 1,000 first off. then you need to get more air through the throttle blades alot of times the increased idle willl help, they make an adjuster that ges in between your IAC and TB and lets you tailor your ible some. as far as injectors are concerned I do not know what camshaft but he is on the verge of 42's. give the IAC a good cleaning also, and work with clocking the MAF sensor a bit. it always helps to get the air filter in the fender to!
 

mazroth

Member
May 20, 2005
56
0
6
KY
Feb 23, 2008
#4
  • Feb 23, 2008
  • #4
nos90gt said:
My buddy has a 302 .30 over afr 185's Vortech 5psi supercharger. 30lbs inj. fuel pressure with vac. line off in 40. Has a 255 fuel pump. FMU. Timing is set to 10' .The car will not idle for ****. TPS is set at .99. Base idle is around 800rpm. Idle starts surgeing up and down then shuts off. Driving the car and coming to a stop the car with die unless giving it some gas then it will smooth out for a min. Any idea's? Does he also need bigger injectors? Maybe 42's? Thanks for any help.
Click to expand...

Had this problem on my other lx I sold recently. It had 30s with a c & l meter, and the fmu. Really should take the car to a tuner, and let them put a chip in it. Mine first started out after a restart even when warm, surging, then dying if I didnt give it gas. Later, it got so bad, it didnt want to ever stay running. I played with the tb so much, and everything to try and get it to run, it always kept going back to the same problem, though I could get it to stop for awhile.

When I put my 306 in my coupe, I stole the 30s off the strim hatch, and bought a new meter for the coupe. Then, I took off the c & l meter, sold it, and put the stock meter and injectors back in it. Never got around to messing with it again, cause the coupe needed my attention. I sold the hatch, wasnt running, I think I did mess with the distributer once, along with taking off the upper etc. But, the new owner got it running by just re-doing the dist.. I asked him it runs and idles good? He said it did, so I am guessing it was my crappy c & l meter. Some like them, but had bad experience with mine. I like the pmas on my coupe alot. But every one of them can benefit from a tune. Hope this helps.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Feb 23, 2008
#5
  • Feb 23, 2008
  • #5
i'd consider a tune. a blower fanning air into the engine just throws it out of whack compared to what a normally aspirated engine does. and seeing how the car has 30lber on it i would get a tune.
 
N

nos90gt

New Member
Nov 30, 2003
70
0
0
Central FL
Feb 23, 2008
#6
  • Feb 23, 2008
  • #6
It has a Granatelli mass-air.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Feb 23, 2008
#7
  • Feb 23, 2008
  • #7
Any exhaust or vacumm leaks? If you mix up vacumm hoses this will happen.

The IAC adjuster plate is a bandaid, all it does is cover up a real problem.

As for you may be under injectored, at idle that shouldn't be the issue.
 
5

57fairlane

New Member
Apr 2, 2005
560
0
0
Oakwood, GA
Feb 24, 2008
#8
  • Feb 24, 2008
  • #8
9 times out of 10 its too much fuel at idle.

Get it tuned with a chip or PMS (or other tuning option)
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Feb 24, 2008
#9
  • Feb 24, 2008
  • #9
57fairlane said:
9 times out of 10 its too much fuel at idle.

Get it tuned with a chip or PMS (or other tuning option)
Click to expand...


His car is messed up, fixing it with a tuner before the mechanical end is repaired would just be masking the problem.
Tuners tweak the sytem, not repair it.
 
5

57fairlane

New Member
Apr 2, 2005
560
0
0
Oakwood, GA
Feb 24, 2008
#10
  • Feb 24, 2008
  • #10
please, I just tuned a 306 with an s-trim yesterday (and have tuned 3 almost identical setups with a PMS). I have seen enough blower cars to know that without tuning (not just fuel pressure and timing) they will run rich at idle and have a hard time staying steady.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Feb 24, 2008
#11
  • Feb 24, 2008
  • #11
57fairlane said:
please, I just tuned a 306 with an s-trim yesterday (and have tuned 3 almost identical setups with a PMS). I have seen enough blower cars to know that without tuning (not just fuel pressure and timing) they will run rich at idle and have a hard time staying steady.
Click to expand...

And what did people do for the 10 years before the pms existed?
I know, they fixed the car right.
Everyone knows you make the car run right, THEN tune it, not the other way around.
I've seen cars first hand that run fine making in excess of 600rwhp with no issues.
I'll accept the opinion from some of the other guys here that you can make good, even better with a tuner, but i have a hard time accepting that EFI 5.0 mustangs have existed since 1986, and to get it to run right you need a PMS that has only existed for a handful of years.
 

mazroth

Member
May 20, 2005
56
0
6
KY
Feb 24, 2008
#12
  • Feb 24, 2008
  • #12
Im betting mine was just really rich at idle, causing the surge. Never will know for sure though since I sold it. Was tired of the aod and red interior though.
 
You must log in or register to reply here.

Similar threads

K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
237
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
912
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
R
Engine Fox body doesn’t run hot until I start driving
  • Rose5oh
  • Mar 17, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
1K
Fox 5.0 Mustang Tech Jun 7, 2025
limp
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
847
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?