This came out of my experience with a Summit/Northern radiator that will NOT work on a '70 (or any pre-69-70 year, I assume there is less hood clearance up front due to the flatter hood rather than the curved '69-70 hood? The issue is that a 31" radiator is too wide to sit on the strut rod brace and must sit on the frame rails.
Whatever your reason for wanting a 31" radiator, if you're interested in one, this should be a good thread for you. Hot stroker motor, turbos, hot weather - whatever. I know some will chime in with the opinion that a radiator wider than the core opening is useless, but I feel that the extra space is still bringing in cooler air than the heat of the water it's trying to cool, so it should help. And some might want to widen their core support or create extra openings for a wider radiator to suck in outside air.
What I found is that a 31" radiator that is 19" tall with a filler neck on the side, the Summit 380463, won't fit because the filler neck hits the hood when the radiator is sitting on the frame rail, even with no padding:
Summit Racing SUM-380463 - Summit Racing® Direct Fit Aluminum Radiators - Overview - SummitRacing.com
It looks like it's better to look for radiators with different filler neck locations, or simply shorter radiators like this Ron Davis fan and crossflow radiator combo that is 16" tall, the 1A-31163F-2 , with passenger's side upper inlet and driver's side lower outlet that's correct for a '70:
Off-Road Radiators from Ron Davis Racing Products
The Ron Davis has a monster dual SPAL fan unit that looks great at 3440cfm, I would just wonder about clearance, but others could chime in. The whole unit is 7.5" thick with fan.
This Griffin unit looks pretty nice and all the specs are the same as the Ron Davis unit with fan above - 26" core width, 1.5" inlet, 1.75" outlet, 1" tubes, dual-row:
Griffin Thermal Products 1-26272-X - Griffin Aluminum Pro Series Radiators - Overview - SummitRacing.com
If anybody else has any comments or recommendations, this is the thread . . . :SNSign:
Whatever your reason for wanting a 31" radiator, if you're interested in one, this should be a good thread for you. Hot stroker motor, turbos, hot weather - whatever. I know some will chime in with the opinion that a radiator wider than the core opening is useless, but I feel that the extra space is still bringing in cooler air than the heat of the water it's trying to cool, so it should help. And some might want to widen their core support or create extra openings for a wider radiator to suck in outside air.
What I found is that a 31" radiator that is 19" tall with a filler neck on the side, the Summit 380463, won't fit because the filler neck hits the hood when the radiator is sitting on the frame rail, even with no padding:
Summit Racing SUM-380463 - Summit Racing® Direct Fit Aluminum Radiators - Overview - SummitRacing.com
It looks like it's better to look for radiators with different filler neck locations, or simply shorter radiators like this Ron Davis fan and crossflow radiator combo that is 16" tall, the 1A-31163F-2 , with passenger's side upper inlet and driver's side lower outlet that's correct for a '70:
Off-Road Radiators from Ron Davis Racing Products
The Ron Davis has a monster dual SPAL fan unit that looks great at 3440cfm, I would just wonder about clearance, but others could chime in. The whole unit is 7.5" thick with fan.
This Griffin unit looks pretty nice and all the specs are the same as the Ron Davis unit with fan above - 26" core width, 1.5" inlet, 1.75" outlet, 1" tubes, dual-row:
Griffin Thermal Products 1-26272-X - Griffin Aluminum Pro Series Radiators - Overview - SummitRacing.com
If anybody else has any comments or recommendations, this is the thread . . . :SNSign: