• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

32v "B" heads VS. Trick Flow 2v heads

  • Thread starter Thread starter BK_CAULEY
  • Start date Start date Jan 11, 2009

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jan 11, 2009
#1
  • Jan 11, 2009
  • #1
pretty cut and dry. which ones do you guys think flow better? no porting just straight on a motor and running. got a few irons in the fire and need some opinions.


Laser STFU.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jan 11, 2009
#2
  • Jan 11, 2009
  • #2
What is done to the car now? 289HP and 311 TQ is good. Is that at the wheels?

I would think just getting Trick Flow heads would be more cost effective. Getting early Cobras heads sounds costly. Ever see how much 96-98 Cobra intakes go for?
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jan 11, 2009
#3
  • Jan 11, 2009
  • #3
i can get a complete 98 cobra motor for $900 or a 98 32v mrk 8 mtr for $500.

ported PI heads, comp valve springs
vt stage 2 cams
unkown brand upper plenum and throttle body (bought used and he didnt know) looks kinda like the dragon ones but not sure.
BBK longtubes, off road H, bassani mufflers
motive 4.10 gears ,new bearings throughout
custom tune (over written on an old sct tune it already had)
 

mustangman9812

10 Year Member
Jan 14, 2004
661
6
49
Mars Hill, NC
Jan 12, 2009
#4
  • Jan 12, 2009
  • #4
4v! Thats what i am building now for my GT
 

superstang01

Active Member
Oct 11, 2006
448
9
29
Kingston, On, Canada
Jan 12, 2009
#5
  • Jan 12, 2009
  • #5
i think it would be alot easier to stay 2v...and im curious to see what these trickflow heads will make power wise! so i say trick flow!
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jan 12, 2009
#6
  • Jan 12, 2009
  • #6
I think you're spending a lot of money, for very little with either one at this point. Especially if you plan on staying N/A. I mean.....you've already got ported PI's. How much more flow do you think you're going to need when you're only pushing 4.6L of air through them. I'd save up for a power adder at this point and call it a day. That $900 you were going to spend on a Cobra engine, or $1,500+ you were going to spend on a set of Trick Flow heads will go a long way towards a blower.
 

mogs01gt

Founding Member
Jul 22, 2002
3,113
30
119
Ohio
Jan 12, 2009
#7
  • Jan 12, 2009
  • #7
BK_CAULEY said:
pretty cut and dry. which ones do you guys think flow better? no porting just straight on a motor and running. got a few irons in the fire and need some opinions.
Laser STFU.
Click to expand...
The 2v heads will provide a better power curve and the TFS heads will out flow the stock B heads.
 

tank_567

Active Member
Mar 19, 2007
731
26
29
Raleigh, Nc
Jan 12, 2009
#8
  • Jan 12, 2009
  • #8
stick w/ the 2v, its alot of work/money to put 4v heads on. aftermarket cams 1000+ vs 500+, not to many intakes to choose from, have to get new headers, plus all the other parts. Your better off saying w/ your modded 2v and adding a power adder or getting the trickflow heads.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jan 12, 2009
#9
  • Jan 12, 2009
  • #9
I gotta go with Gearbanger on this one. When you have a mod motor, go with a blower. They can handle the boost with a good tune and good fuel. Save the HCI work for pushrods.
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,402
3,548
233
Jan 12, 2009
#10
  • Jan 12, 2009
  • #10
mogs01gt said:
The 2v heads will provide a better power curve and the TFS heads will out flow the stock B heads.
Click to expand...
No they wont. B heads outflow Termi heads. B heads can flow way more then is needed. They just dont have the velocity of the TF or 03/04 heads.

That being said, I think 4v OR TF heads will only give you 10+ hp over what you have. The Teksid block is lighter which will help in the handling department and the block is much stronger as well. So I can see the difficulty in the choice. A power adder such as the turbo you are looking at would prolly be better for you

What is your power goal?
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jan 12, 2009
#11
  • Jan 12, 2009
  • #11
LaserSVT said:
No they wont. B heads outflow Termi heads. B heads can flow way more then is needed. They just dont have the velocity of the TF or 03/04 heads.

That being said, I think 4v OR TF heads will only give you 10+ hp over what you have. The Teksid block is lighter which will help in the handling department and the block is much stronger as well. So I can see the difficulty in the choice. A power adder such as the turbo you are looking at would prolly be better for you

What is your power goal?
Click to expand...

Here you are....03/04 DOHC cobra/mach heads> 96-98 B series heads even in raw flow #s.

 

Attachments

  • 6632V4VFlowNumb.webp
    36.6 KB · Views: 422
Reactions: sonicblue87lx

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,402
3,548
233
Jan 12, 2009
#12
  • Jan 12, 2009
  • #12
Thanks.... but I am gonna play dumb and not believe it
I know I have read more then a half dozen times that b heads flow more then 03/04 but the air velocity wasnt nearly as high so they didnt work as well
You can see that the 4V flows WAY more then any 2V though
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jan 12, 2009
#13
  • Jan 12, 2009
  • #13
i already have a power adder for it. and im taking the pi heads off because they have already been shaved/decked and i know that cant be boost friendly.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jan 12, 2009
#14
  • Jan 12, 2009
  • #14
BK_CAULEY said:
i already have a power adder for it. and im taking the pi heads off because they have already been shaved/decked and i know that cant be boost friendly.
Click to expand...

I doubt a slight decking is going to change compression figures much. I have mine decked about .010-.015 as well and I'm running 9-10psi with my set up. I doubt you could shave enough material from them at all to affect the compression ratio to that point where its going to have a negative effect.

Besides....you could always work the air damn in the combustion chamber down a little if you were really worried about it. Its really a non-issue IMO?
 

mogs01gt

Founding Member
Jul 22, 2002
3,113
30
119
Ohio
Jan 12, 2009
#15
  • Jan 12, 2009
  • #15
hotmustang331 said:
Here you are....03/04 DOHC cobra/mach heads> 96-98 B series heads even in raw flow #s.

Click to expand...
The untouched 2v TFS heads flow about the same or more than the B heads and they will have a better power curve.


Stay 2v!
 

Attachments

  • 6632V4VFlowNumb.webp
    36.6 KB · Views: 1,548

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Jan 12, 2009
#16
  • Jan 12, 2009
  • #16
Don't wan to sound like TOO much of a noob, but what numbers do you look at on that chart?
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jan 12, 2009
#17
  • Jan 12, 2009
  • #17
02nightmaregt said:
Don't wan to sound like TOO much of a noob, but what numbers do you look at on that chart?
Click to expand...

it depends on what head you want to know, the number all the way on the left is the valve lift, and the other numbers are the cfm flow rating of each head
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jan 12, 2009
#18
  • Jan 12, 2009
  • #18
mogs01gt said:
The untouched 2v TFS heads flow about the same or more than the B heads and they will have a better power curve.


Stay 2v!
Click to expand...

Remember this test was done at 25"....so you will need to convert the #s to 28"s to compare with the trickflow tests.
 
You must log in or register to reply here.

Similar threads

M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
857
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
909
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
Exhaust 1 3/4” Long Tubes on a Fox Body AOD – Easiest route?
  • 5.0 Mike
  • Mar 19, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Mar 21, 2025
5.0 Mike
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?