330 rwhp &330 rwtq 99 cobra NA?

BadMoFo

I will sleep with a Mod for a CT

Founding Member

Sep 28, 2001

2,911

0

0

New Bern NC

Feb 22, 2004

#1

• Feb 22, 2004

• #1

what mods can I do to reach this goal NA? thanks. On my last dyno I had 300 rwtq and 297 rwhp and my a/f ratio was off the scale it was so rich.

 

missouri_guy197

New Member

Aug 31, 2002

1,441

1

0

St. Louis, MO

Feb 22, 2004

#2

• Feb 22, 2004

• #2

It'll be tough, but get rid of the BBK CAI(it's probably hurting you more than helping) and get a densecharger, WMS velocity tube, or a UPR powerpipe along with a Pro-M 77/80/87mm MAF...You'll probably need your intake ported and polished also, and get a good tune on it...that may get you close...

 

BadMoFo

I will sleep with a Mod for a CT

Founding Member

Sep 28, 2001

2,911

0

0

New Bern NC

Feb 22, 2004

#3

• Feb 22, 2004

• #3

I figured UD pullies, tune and I was thinking of getting rid of the cai for a denscharger, only reason its on there is because it was on there when I bought the car.

 

103

Founding Member

Dec 30, 2000

597

0

0

Orange Park, FL

Feb 22, 2004

#4

• Feb 22, 2004

• #4

Yup, get pullies, get a tune, get an O/R X pipe (get rid of the H), get an actual cat-back (a non-chambered setup), go to 4.30s just because you'll hate 4.10s at the track. Get an Aluminum FW and an aluminum DS. Get a solid rear, as well.

 

BadMoFo

I will sleep with a Mod for a CT

Founding Member

Sep 28, 2001

2,911

0

0

New Bern NC

Feb 22, 2004

#5

• Feb 22, 2004

• #5

wont be changing the exhuast if I can help it, love the sound of h pipe a chambered muffs. I do hate my 4.10's but will be keeping them and hoping for a supercharger in the coming years.

 

0

01TrueBlueCobra

New Member

Feb 16, 2004

336

1

0

somewhere

Feb 23, 2004

#6

• Feb 23, 2004

• #6

103 said:

Yup, get pullies, get a tune, get an O/R X pipe (get rid of the H), get an actual cat-back (a non-chambered setup), go to 4.30s just because you'll hate 4.10s at the track. Get an Aluminum FW and an aluminum DS. Get a solid rear, as well.

Click to expand...

I agree when I switched from the chambered mufflers to the straight threw mufflers ( Magnaflow ) I gained 12 RWHP on my dyno. Also get the Steeda underdrive pullies and Get the WMS High velocit system setup. Intake features a 4" lower elbow, huge S & B filter, Pro-M 95 mm Mass air meter and a 3.5" high flow tube going to the throttle body.Also I heard about the 99 Cobra not putting out the Horsepower numbers as advertised because their was something wrong with the intake manifold you might want to check this out if you didn't already know, SVT Ford Put a recall on it and was offering a free repair.

 

missouri_guy197

New Member

Aug 31, 2002

1,441

1

0

St. Louis, MO

Feb 23, 2004

#7

• Feb 23, 2004

• #7

Are those numbers SAE or STD 01TrueBlue?

 

B

Blk99SvtCobra

New Member

Feb 2, 2004

68

0

0

Feb 23, 2004

#8

• Feb 23, 2004

• #8

i just got my 99 cobra dynoed i have a densecharger intake, bbk 62 mm tb, steeda u/d pullies, mac hi-flo cats, mac cat back, steeda tri-axe, eibach springs
and ime making 304 horses with 306.7 lbs of torque
it wasnt put over 6000 rpms in 4th
from 4.2 thousand rpms to 5.8 thousand rpms my air fuel falls from 13.2 to 11.2
the guy said its costing me 20 horses on the dyno
where and how can i get this fixed

 

B

Blk99SvtCobra

New Member

Feb 2, 2004

68

0

0

Feb 23, 2004

#9

• Feb 23, 2004

• #9

why did my dyno run so strong without even having Long tubes
since it was dynoed i went to put a maf on my densecharger and i noticed my airfilter in the fender wall fell off could this have been why my dyno results were so strong
since then i went back to stock intake

 

9

99SVTAddict

New Member

May 8, 2003

613

0

0

Clinton Twp, MI

Feb 23, 2004

#10

• Feb 23, 2004

• #10

Don't change the exhaust....especially going to an o/r X pipe (my opinion in general ). You are fine with what you have.

#1 You need Steeda pulleys.
#2 You need to ditch that CAI kit, and go with a WMS or Densecharger. The only real reason you need to get an aftermarket MAF is if you get your intake extrude honed or find someone to do a P&P on it. Then you will need a better MAF.
#3 Tune. Most aftermarket MAF's give you a gain in HP by leaning you out some...a good tune can do the same thing. Add a little timing and you will see the power you want.

Not much else you can do.
I hit 318RWHP while n/a with:
Kook LT headers, o/r H, Flowmasters, Steeda pulleys, WMS intake with 95mm MAF, P&P intake, and a tune. My tuner didn't want to add timing favoring a safe tune over maximum peak hp...I agreed. Then 4 months later I added the blower

If you really care about the extra 5-10 RWHP, then you could go to a straight threw muffler...but I wouldn't give up the sound of your current exhaust for a few extra ponies.

 

103

Founding Member

Dec 30, 2000

597

0

0

Orange Park, FL

Feb 23, 2004

#11

• Feb 23, 2004

• #11

It's been dyno and track proven that X-pipe/straight through mufflers is the best setup headers back on these cars. His car is right there. A few little changes in his exhaust and intake setups will get him to 330/330. These cars are like 3.8s--they either sound great or go fast. It's the same problem for 4-cyl guys...

And for the rich condition, you need to add some timing on the dyno through a good tune. I recommend SCT.

 

BadMoFo

I will sleep with a Mod for a CT

Founding Member

Sep 28, 2001

2,911

0

0

New Bern NC

Feb 23, 2004

#12

• Feb 23, 2004

• #12

Where can I look up the WMS high velocity system, and how much did it cost and ease of install? thanks.

 

missouri_guy197

New Member

Aug 31, 2002

1,441

1

0

St. Louis, MO

Feb 23, 2004

#13

• Feb 23, 2004

• #13

http://www.wmsracing.com

 

OleGrayCar

Special Ed

Founding Member

Dec 28, 2001

1,116

0

0

pullin' that draft, fillin' up your rearview

Feb 23, 2004

#14

• Feb 23, 2004

• #14

BadMoFo said:

Where can I look up the WMS high velocity system, and how much did it cost and ease of install? thanks.

Click to expand...

not to sway your opinion or anything, but you might wanna consider this when you're exploring alternatives to your current CAI setup:
http://www.cnlperformance.com/80mm_96-01.html


With only the C&L 80mm MAF, Steeda UDP's and a DiabloSport chip we put 299 HP- 305.1 ft lbs/tq. to the rear wheels....................
and that's on a 100% stock exhaust system.......... down to the tips.


I'm figuring that we can easily go 325-330 RWHP when we go with a Dr. Gas/ Magnaflow exhaust swap later this year.

 

BadMoFo

I will sleep with a Mod for a CT

Founding Member

Sep 28, 2001

2,911

0

0

New Bern NC

Feb 23, 2004

#15

• Feb 23, 2004

• #15

ouch $450 for the WMS high velocity system, I wouldnt complain if I hadnt just spent $500 on suspension mods. might have to put that one on my wish list for now.

 

103

Founding Member

Dec 30, 2000

597

0

0

Orange Park, FL

Feb 23, 2004

#16

• Feb 23, 2004

• #16

The C&L causes issues with A/F and is not recommended by most tuners. You can get the same effect by advancing timing.

 

Nazman

New Member

Apr 28, 2000

1,097

0

0

San Antonio, TX

Feb 23, 2004

#17

• Feb 23, 2004

• #17

See Sig.

Naz

 

Nazman

New Member

Apr 28, 2000

1,097

0

0

San Antonio, TX

Feb 23, 2004

#18

• Feb 23, 2004

• #18

See Sig.

You will need a P&P intake.

Naz

 

BadMoFo

I will sleep with a Mod for a CT

Founding Member

Sep 28, 2001

2,911

0

0

New Bern NC

Feb 24, 2004

#19

• Feb 24, 2004

• #19

hey Nazman are you using your cobra as a daily driver? I have heard not to get the meziere elec water pump if that is the case?

 

M

Morpheusgpr

Founding Member

Jan 28, 2002

250

0

0

Indianapolis, IN

Feb 25, 2004

#20

• Feb 25, 2004

• #20

Since my pro charger is a bit off in time at this point should I consider doing a disencharger and if so which one? What should I expect from it? Any others better?