• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

331 or 347?

  • Thread starter Thread starter venom97
  • Start date Start date Nov 21, 2005
V

venom97

Member
Apr 29, 2003
258
8
18
Illinois
Nov 21, 2005
#1
  • Nov 21, 2005
  • #1
thinking of building a stroker motor but not for sure which one. what are the pros and cons of each,besides differences between bore and stroke. which company to buy from? any help is appeciated
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Nov 21, 2005
#2
  • Nov 21, 2005
  • #2
you are going to get flamed big time for not searching before you asked this question. I am going with a 331for these reasons:
#1 I am using a stock block
#2 I want to...

if you research and build a 347 correctly it will be just as driver friendly as the 331 and last plenty long enough. It depends what you want for power output, rpm range.. ect. i plan on this for my build : my spare stock block will be all set within the month machining wise
Scat9000 crank, Scat forged i beams, undecided for piston, ProTopline(190cc), Dart Pro 1's(195cc), or TFS Track Heats, XE274HR cam, Performer RPM, 30lb injectors, MAF, 70mm TB, and all the other crap i need.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Nov 21, 2005
#3
  • Nov 21, 2005
  • #3
I'd go with a 347 from DSS.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Nov 21, 2005
#4
  • Nov 21, 2005
  • #4
oh 331= 3.25'' stroke, 4.030'' bore
347= 3.40'' stroke, 4.030 bore''
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Nov 21, 2005
#5
  • Nov 21, 2005
  • #5
The 347 has more potential for horsepower per parts used.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Nov 21, 2005
#6
  • Nov 21, 2005
  • #6
i would save the money, not buy from DSS, put it towards better parts and build it yourself. its more fun too. we cannot give you ANY good ideas untilwe know what you plan for this car... trailer queen, daily driver, compression ratio, hp/tq desires? give us something to work with.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Nov 21, 2005
#7
  • Nov 21, 2005
  • #7
89white50 said:
i would save the money, not buy from DSS, put it towards better parts and build it yourself. its more fun too. we cannot give you ANY good ideas untilwe know what you plan for this car... trailer queen, daily driver, compression ratio, hp/tq desires? give us something to work with.
Click to expand...

His idea is good, too. This is probably what I'd do if you're willing to.
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Nov 21, 2005
#8
  • Nov 21, 2005
  • #8
This post sways my vote. Hope it helps you.
http://forums.stangnet.com/showpost.php?p=5682347&postcount=3
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Nov 21, 2005
#9
  • Nov 21, 2005
  • #9
:Word:
but we dont know if this guy is DD it or what, since like intense blue said the 347 has more potential, but then again if you want more, FI the 331 and goonight.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Nov 21, 2005
#10
  • Nov 21, 2005
  • #10
4u2nv said:
This post sways my vote. Hope it helps you.
http://forums.stangnet.com/showpost.php?p=5682347&postcount=3
Click to expand...

I hope that was an early april fools joke??

Go 347 hands down. I dunno why anyone would give up 16 FREE cubic inches. Built/machined properly either engine is fine. Build a 347, click the link in my sig and talk to Rick 91GT. If you have any other question i'll be glad to help, just PM me. Looks like i'm the only one in this thread so far who actually has a stroker engine (Gee what a shocker )

For the pansies worried about 347's being bad, probe makes a 5.315" rod and it uses a 331 piston with a 3.40 stroke crank. This is actually what i use, but NOT because i'm a pansy, but because the 5.44" rod set up Iwanted was on a long backorder so I had no choice but to use this set up.
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Nov 21, 2005
#11
  • Nov 21, 2005
  • #11
Grn92LX said:
I hope that was an early april fools joke??

Go 347 hands down. I dunno why anyone would give up 16 FREE cubic inches. Built/machined properly either engine is fine. Build a 347, click the link in my sig and talk to Rick 91GT. If you have any other question i'll be glad to help, just PM me. Looks like i'm the only one in this thread so far who actually has a stroker engine (Gee what a shocker )

For the pansies worried about 347's being bad, probe makes a 5.315" rod and it uses a 331 piston with a 3.40 stroke crank. This is actually what i use, but NOT because i'm a pansy, but because the 5.44" rod set up Iwanted was on a long backorder so I had no choice but to use this set up.
Click to expand...

No, I meant no ribbing by my post. I have always dreamt of getting my old Fox together. DD/street would be my main motive and lot I've read lately indicates a 331 might be best in economy, reliability, and emissions conducive. Am I getting fed a bunch of BS?
 

SQUEEZE&STROKE

New Member
Jun 24, 2005
0
0
0
SOUTHERN CA
Nov 21, 2005
#12
  • Nov 21, 2005
  • #12
Here is my setup and a whole host of info on both carbed and fuel injected 331's.

http://forums.stangnet.com/showthread.php?t=594340
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Nov 21, 2005
#13
  • Nov 21, 2005
  • #13
4u2nv said:
Am I getting fed a bunch of BS?
Click to expand...

Yup
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Nov 21, 2005
#14
  • Nov 21, 2005
  • #14
i just got done with my 331....built it all myself and have just under 2000$ in it with machining costs and all...... Probe forged flat tops, forged eagle rods and scat crank
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Nov 21, 2005
#15
  • Nov 21, 2005
  • #15
It's actually a 332 vs. 347

Built and machined competently with quality components, the only substantial difference between the two is the stroke and resulting displacement. Toss a coin. Take your pick.
 

Fuzion

Member
May 24, 2005
81
0
6
Virginia
Nov 21, 2005
#16
  • Nov 21, 2005
  • #16
Modular2v said:
i just got done with my 331....built it all myself and have just under 2000$ in it with machining costs and all...... Probe forged flat tops, forged eagle rods and scat crank
Click to expand...

wow man u built a complete 331 with all those goodies for under 2000, thats without intake and heads right?
Im planning on a 331 soon and i had no idea it could be done for so cheap.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Nov 22, 2005
#17
  • Nov 22, 2005
  • #17
There is a difference between a 331 and 347.

Rod ratio is steeper on the 347 which equals more wear.

They have different skirts on the piston for a reason

More piston speed is prevalent with the 347 which equals more wear as well.

More sideloading on the cylinder walls is present as well.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Nov 22, 2005
#18
  • Nov 22, 2005
  • #18
Fuzion said:
wow man u built a complete 331 with all those goodies for under 2000, thats without intake and heads right?
Im planning on a 331 soon and i had no idea it could be done for so cheap.
Click to expand...
yes that is without intake, heads and all the goodies......that just included the rotating assembly, rings, bearings and machine work......i did all the assembly myself
 
V

venom97

Member
Apr 29, 2003
258
8
18
Illinois
Nov 22, 2005
#19
  • Nov 22, 2005
  • #19
thanks for the help. i just want to build something and find a car to put it in later. im looking for something that makes good power but will be as dependable as a dd (it wont be) and last awile,provided the amount of abuse it will be given. ive heard of the 347 oiling problems with the old kits,and it seems like the 331s are starting to take over. it sounds to me the 331 are designed to last a little longer and has some good points, like piston skirt design. i think thats the way im leaning towards. again thanks for the help
 
You must log in or register to reply here.

Similar threads

S
Best Ebay aftermarket Radio/screen
  • Shurkeel
  • Oct 8, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
141
2005 - 2014 S-197 Mustang -General/Talk- Oct 9, 2026
gkomo
Weber Carburetor tuning help
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
242
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
C
Help with manual conversion
  • CPH89LX
  • Aug 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
706
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
2000xp8
T
Which to keep 1979 Ford Mustang or 2013 VW Jetta TDI Sedan
  • toasterboy1
  • Sep 13, 2025
  • Off-Topic Hangout
Replies
4
Views
189
Off-Topic Hangout Sep 14, 2025
toasterboy1
T
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
322
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?