347 in a Jeep

[STOWE]

Evening folks... I thought I would share what we are working on. I have a Jeep that a couple of friends put a '94 engine into it a few years ago. My company has deployed me to Kyrgyrzstan so in my boredom, I have a friend rebuilding my motor, but ended up deciding to stroke it to a 347.

Here are some pictures:

Before:

Now (high lights):

Down to the copper:

 

[STOWE]

New parts...

Fuel Rails

E303

GT40 stuff

Also going with 30# injectors. I do have a couple of questions...

- What is the 'better' computer to go with, as I am done, it will go to a shop and be Dyno tuned.

- I have read it a few times, but I cant visually see it, but 'they' say that you can put a foxbody timing cover on a '94 block and use the foxbody water pump etc?

- Mass Air, can I keep my stock, or should I be looking for another, and which brand/kind is recommended?

Any Comments, questions or concerns.. please let me know. I am a newb.

Thanks!

 

[earleys94gt]

Very cool project!

I assume this is an off-roading jeep?

Always nice to see someone else's project, especially one as unique as this one.

 

[STOWE]

It is 95% off road only... I will take the kids to school or go to the store in it just for *****s and giggles. I have a friend who is putting a (stock) LS-1 in his Jeep, so we are joking about taking it to the strip one night.