• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

393 build input

  • Thread starter Thread starter stowe44
  • Start date Start date May 3, 2010
S

stowe44

New Member
Jul 14, 2009
2
0
0
Beulah, MB Canada
May 3, 2010
#1
  • May 3, 2010
  • #1
I have a 1988 Mustang lx 5.0l 5spd. Going to be a street machine 98% street driven 2% track, Currently building a 393 carb to Drop in, I just am unsure on which heads would work best with my combo, afr 185s? 205s?? or something cheaper with similar flow would be great! wanted assembled heads also. If you have any input in the components i already have let me hear it! Also any hp guesses?

Comp Cams magnum hydraulic flat tappet 292h
victor jr intake
scat cast 3.850 crank
Pistons Search Results for KB364-030 - SummitRacing.com
Holley 4150 avenger 750cfm
Heads???
 

90lxcoupe

20+ Year Stangneter
Oct 7, 2003
3,596
350
134
May 4, 2010
#2
  • May 4, 2010
  • #2
Your about 4 days too late, summit was just running a wicked sale price on trick flow CNC 205's for 1500 bucks. That would be the head i put on that motor, personally i think AFR's are a little over rated
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
May 4, 2010
#3
  • May 4, 2010
  • #3
My dad has a 393 running AFR 185s. The upgraded version, but no work done to them. This is a race car but has been 9.88 @ 136 with a simple 393/AFR/Solid Roller/Carb set up.

That being said, I'm sure he would benfit from larger heads, these were just redily available at the time, and he has been pleased with them.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
May 4, 2010
#4
  • May 4, 2010
  • #4
25thmustang said:
My dad has a 393 running AFR 185s. The upgraded version, but no work done to them. This is a race car but has been 9.88 @ 136 with a simple 393/AFR/Solid Roller/Carb set up.

That being said, I'm sure he would benfit from larger heads, these were just redily available at the time, and he has been pleased with them.
Click to expand...

Out of curiosity, does he run a forged crank, and what does he spin that engine to (RPM)? Flat tappet or roller?
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
May 4, 2010
#5
  • May 4, 2010
  • #5
I would have to get exact specs from him, but he designed it to rev low, 6500 tops. Forged crank, nitrous pistons, van block, used heads, used intake, I believe roller (not exactly sure), used transmission. Budget build, but the car is set up for the track. A street version of what he has is probably a middle 10 second car.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
May 5, 2010
#6
  • May 5, 2010
  • #6
25thmustang said:
I would have to get exact specs from him, but he designed it to rev low, 6500 tops. Forged crank, nitrous pistons, van block, used heads, used intake, I believe roller (not exactly sure), used transmission. Budget build, but the car is set up for the track. A street version of what he has is probably a middle 10 second car.
Click to expand...

By "nitrous pistons" I assume you mean high compression...? Does he spray the car?

Damn, I love stroked Windsor Foxes. I think dropping a W between the strut towers is how God meant these cars to be.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
May 5, 2010
#7
  • May 5, 2010
  • #7
Yes higher compression, 12:1 I believe...

He runs on motor now, but the car might see a smaller 150-200 shot sometime in the future. He made some changes since the 9.88 and wants solid 9.7xs this year. I think if/when he gets it to the 9.5x range he might throw a shot on it. I think the block might not be up to that task, but only one way to know...

 
S

stowe44

New Member
Jul 14, 2009
2
0
0
Beulah, MB Canada
May 5, 2010
#8
  • May 5, 2010
  • #8
ANYWAYS any opinions?
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
May 6, 2010
#9
  • May 6, 2010
  • #9
AFR 205s
 

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
May 6, 2010
#10
  • May 6, 2010
  • #10
stowe44 said:
ANYWAYS any opinions?
Click to expand...

Easy, tiger. This is a TALK section, guys TALK in here and 25thmustang's father's car is running the heads he's recommending you use so what they're BSing about is pertinent information for your question.

Anyway, I'd go with the Trickflow CNC 205s. That's a whole lot of head for the money, which is also what she said.
 
You must log in or register to reply here.

Similar threads

9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
606
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Engine HELP - 351W Based Build Under Stock Hood
  • thinkfaster
  • Oct 17, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
D
Building a 302 and Require Input
  • dduran
  • Jun 15, 2020
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
9
Views
6K
1965 - 1973 Classic Mustangs -General/Talk- Jul 18, 2020
DBegley
D
M
Mustang 67 engine project
  • Mvcasade
  • May 28, 2018
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- May 29, 2018
tos
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?