• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2014 Specific V6 Tech

4.0L Mustang- Track Times Anyone?

  • Thread starter Thread starter Swarzkopf
  • Start date Start date Apr 19, 2005
  • 1
  • 2
Next
1 of 2 Next Last

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
Apr 19, 2005
#1
  • Apr 19, 2005
  • #1
Anyone here taken their 4.0L Mustang to the track?

I'm real curious to see what kind of numbers these cars turn in the real world.

Feedback appreciated. In a year or so I may consider purchasing one of these as a new daily driver.
 

echo7

10 Year Member
Mar 30, 2005
706
41
59
FL
Apr 19, 2005
#2
  • Apr 19, 2005
  • #2
I raced a 2004 3.9L manual mustang today, mines auto, both are stock, had 2 car lengths on him by 80mph, if that gives you an idea. I do have a GT muffler though but i don't know if it gains any hp.
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
Apr 19, 2005
#3
  • Apr 19, 2005
  • #3
Eh....impossible to really tell from something like that, but thanks for the info.

Only 3.8L Mustang I saw run was a 5speed car with bolt-ons (dual exhaust, "cold air induction", ect.) running 15.88s....if you had two cars on him at 80, close to where he'd be finishing the 1/4, you'd be running ~15.5.

I'm hoping to see the 4.0L cars at ~15.0 or even high 14s. Shouldn't be impossible, since the SN95 5.0s had about the same power and could run high 14s with a proper driver.
 

fazm83

New Member
Apr 8, 2005
747
0
0
phoenix, arizona
Apr 20, 2005
#4
  • Apr 20, 2005
  • #4
lots of the 5.0's also had posi traction. They might have had the same horsepower, but the torque is still not as good on the new 4.0's. My best time is a 15.10 (gtech) and my best track time is a 15.31.

EDIT: i have never seen a 5.0 run 14's stock either, maybe with just better tires, but never stock. Buddy has an 89 gt thats 100% stock to still usin donut tires and stock intake (think he has deep cell battery lol). And he can only pull 15.3's at the track as well (on the street i seem to beat him more often than not). Also seen a 90 gt with headers, gears, intake and tires only pull a 14.4.
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
Apr 20, 2005
#5
  • Apr 20, 2005
  • #5
fazm83- You ran 15.31 in a 4.0L Mustang? Cool....what transmission? Care to post your 60' and 1/4 mph too?

As for the 5.0s, I've seen plenty of stockers run high 14s. Even some of the mags got 14s out of the fox body cars.
 

echo7

10 Year Member
Mar 30, 2005
706
41
59
FL
Apr 20, 2005
#6
  • Apr 20, 2005
  • #6
I don't know if you guys already heard about this site, but it shows 0-60 and 1/4 mile times for most stock vehicles. I submitted the V6 and GT times on the 05's.

http://www.albeedigital.com/supercoupe/articles/0-60times.html
 

fazm83

New Member
Apr 8, 2005
747
0
0
phoenix, arizona
Apr 21, 2005
#7
  • Apr 21, 2005
  • #7
I was bout to post my timeslips but the ones i found have me runnin 14's so i think i have mine in my friends g35 and i have his lol, as soon as i get mine ill post.
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
Apr 21, 2005
#8
  • Apr 21, 2005
  • #8
Thanks man.
 

fazm83

New Member
Apr 8, 2005
747
0
0
phoenix, arizona
Apr 24, 2005
#9
  • Apr 24, 2005
  • #9
manual tranny
60ft 2.402 sec
1/8 mile 9.88 sec
1/8 mile mph 75.02mph
1/4 mile et 15.26
1/4 mile mph 95.1mph

in case you are curious, my friends g35
60ft 2.350sec
1/8 mile 9.67 sec
1/8 mile mph 75.20mph
1/4 mile et 14.98
1/4 mile mph 95.3mph

that auto of him hurts him off the line and goin down the track after bout the 1/8th mile (he has 295-30zr19's on his car, so those help a lil off the line).

His car has headers, intake, exhaust, and retune.

EDIT: After my 3rd gear shift it appeared to me as if i was starting to catch him.
(firebird raceway, from what ive heard, not that good of a track)
 
0

05SonicBlueV6

New Member
Apr 17, 2005
4
0
0
Laurel Hill NC
Apr 24, 2005
#10
  • Apr 24, 2005
  • #10
Haven't been to a track but I've got some times using my G-Timer.

Mine is an automatic.

Stock my best was a 15.2 90.6, 2.32 60', 6.9 0 to 60

After tuning w/ XCalibrator best was 14.9 @ 91.6, 2.2 60', 6.42 0 to 60

After adding CAI best is 14.78 @ (94 I think, forgot to write it down), 2.15 60', 6.35 0 to 60

No improvement noticed after adding axle back exhaust (except it sounds better).

The stock 15.2 run was hard to duplicate (had mostly 15.4 & 15.5 runs).
The 14.9 w/XCalibrator was backed up with some 15.0 & 15.05 runs.
The 14.78 is backed up with a lot of 14.8 & 14.85 runs. As long as I don't spin the tires too much I can usually get around a 14.8.

JBA headers should be here soon.
I think a set of 4.10 gears should get below 14.5 easy. (I'm still thinking on that change though).

I know the G-Timer may not be completely accurate but it shows how much the changes have helped my car.
 

echo7

10 Year Member
Mar 30, 2005
706
41
59
FL
Apr 24, 2005
#11
  • Apr 24, 2005
  • #11
Yeah, it doesnt matter if its accurate, but it shows change, and as long as the change is consistant, then that means good So just a retune and a cai can drop it from the stock 6.9 to 6.4 and lower, awesome find! especially for an auto.

EDIT: And your still running single exhuast right?
 

fazm83

New Member
Apr 8, 2005
747
0
0
phoenix, arizona
Apr 24, 2005
#12
  • Apr 24, 2005
  • #12
I would say those are pretty accurate numbers since magazine testing is 15.3 for the stock (15.2 and 15.4 split down the middle). runnin high 14's is pretty good with just those 2 mods. Im waiting for the diablosport to come out for the v6, as ive noticed people are getting better results from their gt's with that compared to the sct. Im hopin with a CAI, exhaust, and tune i can pull some 14.6's. (best gtech run is 15.10)
 

fazm83

New Member
Apr 8, 2005
747
0
0
phoenix, arizona
Apr 24, 2005
#13
  • Apr 24, 2005
  • #13
By the way, i forget which magazine did this, but one of the ones i subscribe to just had an article on timers. The gtech proved to be higher (slower) than what was actually being run. I believe the car was a G6 and ran something like a 16.15 and the gtech said about a 16.25
 

302fordracer

New Member
Mar 27, 2004
738
0
0
Vancouver, WA
Apr 25, 2005
#14
  • Apr 25, 2005
  • #14
fazm83 said:
lots of the 5.0's also had posi traction. They might have had the same horsepower, but the torque is still not as good on the new 4.0's. My best time is a 15.10 (gtech) and my best track time is a 15.31.

EDIT: i have never seen a 5.0 run 14's stock either, maybe with just better tires, but never stock. Buddy has an 89 gt thats 100% stock to still usin donut tires and stock intake (think he has deep cell battery lol). And he can only pull 15.3's at the track as well (on the street i seem to beat him more often than not). Also seen a 90 gt with headers, gears, intake and tires only pull a 14.4.
Click to expand...

You're right 5.0 had MORE torque 285 from the factory compared to the 4.0's 240...and a friend of mine (insane driver lots of racing experience) ran a bone stock right down to the paper filter 95 gt and got a 14.0 and if you would like his name he is on stangnet I will ask him what it is..just pm me...the sn95 5.o would take the 4.0 don't kid yourself...I worked at ford for awhile and know the capabilities of the 4.0L it is a strong engine but it will not hold it's own against the 5.0
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
Apr 25, 2005
#15
  • Apr 25, 2005
  • #15
fazm83, you need to work on that 60'! I could see your car running 14s with a better launch.
 

fazm83

New Member
Apr 8, 2005
747
0
0
phoenix, arizona
Apr 25, 2005
#16
  • Apr 25, 2005
  • #16
Tell me about it, i either bog or light em up at the track lol. My friend pulled a 2.124 60' time in my car and he only went once, but he cant powershift like i do, so he ran a 16.2 lol.

302fordracer, thats pretty amazing, not saying its impossible either, just sayin i've never seen it. Its all about the driver. I've seen a mach1 run a 15.2 so anything is possible lol.


EDIT: 302fordracer, and i wasn't saying the 4.0 would take them, i was saying they had no chance
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
Apr 25, 2005
#17
  • Apr 25, 2005
  • #17
Eh...if you're running high 14s-low 15s, you running with SN95 5.0s, like it or not. You're even closer with SN95 4.6s.

That's pretty damned good for the base model Mustang.

Thanks for the feedback everyone. I might buy a manual transmission 4.0L in the next year or so. High 14s is quick enough to not frustrate me driving it.
 

fazm83

New Member
Apr 8, 2005
747
0
0
phoenix, arizona
Apr 25, 2005
#18
  • Apr 25, 2005
  • #18
You could always get "a little help from zex" if you get frustrated
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
Apr 25, 2005
#19
  • Apr 25, 2005
  • #19
Heh...I don't know about all that. I'm assuming the 4.0L has the same returnless style fuel system as the 99+ 4.6L cars have? I'm not going to spray a dry shot on that system, and I wouldn't be thrilled with installing a wet kit either.

Besides, my goal is to have a nice, smooth idlin' daily driver that looks good and has enough balls to get out of it's own way and to run 11s with a heads/cam/intake/nitrous combo in my 95 GT. Besides a gauze filter and some Flows I won't be modifying whatever it is I buy.
 

fazm83

New Member
Apr 8, 2005
747
0
0
phoenix, arizona
Apr 25, 2005
#20
  • Apr 25, 2005
  • #20
My only plans for sure are tune, intake, exhaust and possibley gears. If i get the need for speed ill add some headers and maybe like a 50-75 shot.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
281
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
R
For Sale 2008 Mustang Bullitt for sale Richmond Hill, ON, Canada L4C 0S3
  • ROHDRNNR
  • Jun 10, 2026
  • S197 Mustangs For Sale (2005-14)
Replies
0
Views
149
S197 Mustangs For Sale (2005-14) Jun 10, 2026
ROHDRNNR
R
T
It’s been a while lol
  • TripleLAutoandDiesel
  • Jan 24, 2026
  • The Welcome Wagon
Replies
0
Views
94
The Welcome Wagon Jan 24, 2026
TripleLAutoandDiesel
T
6
2010 V6 Sees differently than GT?
  • 6t9Mach1
  • Mar 31, 2026
  • 2010 - 2014 Specific Tech
Replies
2
Views
188
2010 - 2014 Specific Tech Apr 1, 2026
6t9Mach1
6
A
Help ID - Turbo GT, SVO differences
  • aldoelmalo
  • Jun 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
91
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 2, 2026
aldoelmalo
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2014 Specific V6 Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?