4.10's and the 1/4 On an '01 Cobra

race_ne1

New Member

Jul 9, 2004

41

0

0

Warrenville, IL

Jul 22, 2004

#1

• Jul 22, 2004

• #1

Hey guys,

I know 4.10's are the way to go as far as gettin the most performance. But I was wondering about how they do at the track. I've heard rumors that with the different gearing people are actually in mid-shift at the same time they cross the finish line. I believe this would hurt your overall calculated speed. Does anyone have track experience with an '01 and 4.10's to tell me if this is true or not? I have stock 3.27's and am in mid 3rd gear crossing the finish. So I wasn't sure if 3.73's might be a better choice.

Thanks for the input,

Sean

 

missouri_guy197

New Member

Aug 31, 2002

1,441

1

0

St. Louis, MO

Jul 22, 2004

#2

• Jul 22, 2004

• #2

Yep...I have 4.10's and they make me shift into 4th right before I cross the first trap cone at the big end...3.73's are not the way to go as they aren't enough gear...4.30's are actually the best street/strip gear for these cars...4.10's are wonderful if you never hit the strip though, great street gear...

I have a set of 4.56's waiting to go in my car as soon as I get time to get to someone so they can install them for me...

 

9

99SVTAddict

New Member

May 8, 2003

613

0

0

Clinton Twp, MI

Jul 22, 2004

#3

• Jul 22, 2004

• #3

Yup, with 4.10's your shift right before the traps.....this may lower your mph, but still help your ET's slightly. 4.30's would be good for you since your n/a still. 4.56 if you drag the car often. 4.10's are a great street gear though.
Depends on what the purpose of the car is.

I had 4.10's, but now have 4.30's since I swapped to the Viper T56 which has a lower first gearing.

 

95 yellow 5 0

Founding Member

Feb 16, 2002

627

0

16

CT

Jul 22, 2004

#4

• Jul 22, 2004

• #4

what do you top out at with 4.30's? I'm thinking about getting them instead of 4.10s this time.

 

missouri_guy197

New Member

Aug 31, 2002

1,441

1

0

St. Louis, MO

Jul 22, 2004

#5

• Jul 22, 2004

• #5

Top out at what, top speed? It'll be a little more than stock, not as much as 4.10's...

At the track 4.30's will take you to 120mph before you have to shift to 5th

 

9

99SVTAddict

New Member

May 8, 2003

613

0

0

Clinton Twp, MI

Jul 22, 2004

#6

• Jul 22, 2004

• #6

what do you top out at with 4.30's? I'm thinking about getting them instead of 4.10s this time.

Click to expand...

At the traps I was crossing close to redline in 4th....and my MPH was 118. This was on a stock diameter tire....if I had been running a 27" or 28" tall tire out back, it would be good for more MPH if I was capable of it.

 

95 yellow 5 0

Founding Member

Feb 16, 2002

627

0

16

CT

Jul 22, 2004

#7

• Jul 22, 2004

• #7

missouri_guy197 said:

Top out at what, top speed? It'll be a little more than stock, not as much as 4.10's...

At the track 4.30's will take you to 120mph before you have to shift to 5th

Click to expand...

the 96 with 4.10's was still pullin in 5th gear at around 7300 rpms. the needle was passed 160 by about an inch. someone had posted a chart a while ago and said it is possible to hit 180 with 4.10's, so i guess i did. not gonna do it again. i just thought with 4.30 i would lose top speed, guess not. so you can still shift into 3rd goin 80 and 2nd at 45 with 4.30s and still get through the power band?

 

missouri_guy197

New Member

Aug 31, 2002

1,441

1

0

St. Louis, MO

Jul 22, 2004

#8

• Jul 22, 2004

• #8

Here's a good gear comparison calculator:

http://www.svtoa-atlanta.org/cgi-bin/trans.cgi

At 80 dropping from 5th to 3rd would have you going from 3018rpms to 5991rpms with the 4.30's and at 45 dropping from 4th to 2nd you would go from 2533 to 5042...

 

race_ne1

New Member

Jul 9, 2004

41

0

0

Warrenville, IL

Jul 23, 2004

#9

• Jul 23, 2004

• #9

Thanks for all the input guys. Think I'm still going with the 4.10's since most of my racing is done on the street anyhow. (only to 55mph of course)

Sean

 

C

chuckystang

New Member

Jul 12, 2004

217

0

0

Jul 24, 2004

#10

• Jul 24, 2004

• #10

How come everyone bashes 373 gears in a cobra? They must be better than the stock 327 right? the 410 and higher gears just dont seem as street and highway friendly.

 

99CobraJMS

Founding Member

Sep 10, 2001

1,545

0

36

Austin

Jul 24, 2004

#11

• Jul 24, 2004

• #11

I have run both, I prefer 3.73s with the Blower and a min of 4.10s for NA stangs.

 

L

lafear01

Founding Member

Dec 4, 2001

452

0

0

Michigan

Jul 25, 2004

#12

• Jul 25, 2004

• #12

99SVTAddict said:

Yup, with 4.10's your shift right before the traps.....this may lower your mph, but still help your ET's slightly. 4.30's would be good for you since your n/a still. 4.56 if you drag the car often. 4.10's are a great street gear though.
Depends on what the purpose of the car is.

I had 4.10's, but now have 4.30's since I swapped to the Viper T56 which has a lower first gearing.

Click to expand...

whatever you do, dont listen to this fool. He has nooooo clue what he's talkin about!