thehueypilot Active Member Feb 25, 2004 1,084 0 37 Medina,Tennessee May 19, 2006 #1 May 19, 2006 #1 I searched the forums with no luck. I have a 93 LX coupe that I put a 427 in and would like to use the stock tach for now. Can I put a resister in line to get it to read correctly? Has any one done this?
I searched the forums with no luck. I have a 93 LX coupe that I put a 427 in and would like to use the stock tach for now. Can I put a resister in line to get it to read correctly? Has any one done this?
B Boss 351 Here sthhhhhhhheeeve take a picthh of my man flowe Jul 13, 2003 2,433 23 48 Canada May 19, 2006 #2 May 19, 2006 #2 never heard of that? You could find a stock V8 tach on ebay though... I know the older Mustangs had a switch 4-6-8 behind the tach...
never heard of that? You could find a stock V8 tach on ebay though... I know the older Mustangs had a switch 4-6-8 behind the tach...
jrichker StangNet's favorite TOOL In Remembrance. Thank you for your contributions Mar 10, 2000 27,512 2,813 234 Dublin GA May 19, 2006 #3 May 19, 2006 #3 Here's a schematic for the OEM tach. If you can figure were to put the resistor, have at it... Some tachs had a 4-6-8 cylinder switch on the back.
Here's a schematic for the OEM tach. If you can figure were to put the resistor, have at it... Some tachs had a 4-6-8 cylinder switch on the back.
thehueypilot Active Member Feb 25, 2004 1,084 0 37 Medina,Tennessee May 19, 2006 #4 May 19, 2006 #4 Thanks for the info!