Ok, just bought a rebuilt 2.3L, roller cam, 4 speed manual, intake, carb, manifolds, ignition system for 200 bucks. It was all out of a scrapped 77 Pinto (except the extra roller cam). I figured that the transmission would fit into my capri (it's the standard ET type 4 speed) but it does not. The transmission itself is 100% identical to what I actually need, it is the tailshaft that is the problem. The mouting holes and position are TOTALLY different on this transmission than what I need. So I have a 2 part dilemma here. I need to get rid of a 77ET Pinto 4 speed and pick up a 79-86ET 4 speed out of a mustang or capri. Being that this is a 2.3L forum, I'm wondering what to do here. Are there any of you that would need a Pinto 4 speed or know of someone that does? Do any of you have a 4 speed out of a capri or mustang that I can buy from you? Or know where I can get one? Any help would be great. I'd like to see the Pinto transmission go to a good home and I'd like to by a mustang/capri 4 speed from someone trustworthy (unlike most of EBay).