5.0 Fuel injection conversion...is this all i need?

[tamadrummer88]

Ok guys, im putting together a "kit" for my 5.0 fuel injection conversion on my 68 302. So far, this is what i got:

upper and lower intakes
fuel rails
stock 19lbs injectors
BBK CAI with new MAF
FMS 70mm thottle body with EGR spacer
TFI distributor
90 GT alternator
BBK UDP
fox PS pump ( Because it has the serpentine pulley)
Fox water pump

Ok, i think that is all that i have for now. Im awaiting the wiring harness and the ECU. Right now, i need to put together the fuel system, and if so, maybe i could get the gas tank from the fox? would it fit in my car? Im open to any suggestions as to what else i need.

oh, and as for the CAI, UDP, and TB, those were all bonuses that my source just had laying around. All 3 are brand new and still in the box. Oh, and another guy also sold me Ford Racing 1.6 Roller rockers and a PI cam!

Thanks guys!


John

 

[garycroix]

Hello. You don't need a new gas tank. You just need a place for fuel to go back INTO your gas tank. I solved this problem on my 66 by getting a fuel tank sender that had a return line already installed on it. I did buy a new 66 gas tank though.

Hope this helps.