• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

5 lug brake lines

  • Thread starter Thread starter rockingchair69
  • Start date Start date May 21, 2006
R

rockingchair69

New Member
Jun 21, 2005
23
0
0
May 21, 2006
#1
  • May 21, 2006
  • #1
Alright guys I have a few questions I was hoping that someone could explain to me what a banjo bolt is I've never seen one before. I also need to know what brake hoses to use fox or sn-95. What do I do about my ebrake what cable should I use. What hoses do I need for the rear. I was also wondering about steering rack what are the best years to use and what are the best years of tie rod ends to use. thanks
 

87ttopstang

Member
Apr 14, 2003
342
0
17
Ontario, Canada
May 21, 2006
#2
  • May 21, 2006
  • #2
Banjo Bolts are the bolts that hold your brake lines to your calipers. They have a small hole drilled through them to allow the brake fluid to pass into the caliper. I used Maximum Motorsport steel braided lines for the front and contacted ClassicTube.com who custom made the rear steel braided lines so I could use the existing hardlines and not have to cut and re-flare them.
 

joncash

just high enough to be functional
Founding Member
Dec 9, 2000
756
4
39
The USA's peen
May 21, 2006
#3
  • May 21, 2006
  • #3
For the parking brake cables (on 92 and earlier, '93's use a different one) you'll need two of Ford Racing # M-2809-A and one M-2810-A. The first number is the two long cables that run back to the calipers and the second one is the short one that connects them both to the parking brake handle. According to the techs at Ford Racing the flex hoses (attaching the calipers to the hardlines) that come with the Cobra conversion kit are 94-95 GT.

Here's the fun part: Starting with the parking brake handle, you're going to have to find someone who can make a small tack weld for you. Converting to rear discs on a Fox usually means defeating the self adjusting mechanism on the parking brake lever. Once the old cables are out, remove the parking brake lever and the short cable that is attached to it. The primary brake cable (the short one attached to the lever) has to be dissasembled--remove the small sheet metal bar that the two secondary (the long ones) cables were atached to and ream out the hole in the middle (11/32") to accomodate the new adjustable primary cable. The rest of the old primary won't be used, but try not to damage the rubber grommet that the primary cable passes through.
 

joncash

just high enough to be functional
Founding Member
Dec 9, 2000
756
4
39
The USA's peen
May 21, 2006
#4
  • May 21, 2006
  • #4
On the lever assembly you have to tack-weld the ratcheting mechanism so it won't ratchet any more. Weld the pawl (the spring-loaded toung of metal that's about two inches long, located near the base of the lever itself) to the second tooth from the front counting from the end that would be closest to the front of the car if it were installed. Install the new primary cable into the lever just as the old one came out and bolt it all back down. Then the new primary cable has to be adjusted from under the car once it is attached to the new secondary cables.

The steering rack is the same, as are the outer tie-rods, so don't worry about those. To work with SN-95 spindles the ball joints will require spacers under the spindle nuts if you keep the stock fox body ball joints, but the best thing to do is press SN-95 ball joints into your fox A-arms.
 
R

rockingchair69

New Member
Jun 21, 2005
23
0
0
May 21, 2006
#5
  • May 21, 2006
  • #5
hey thanks guys. So from what I understand I need fox hoses and sn-95 ends/banjo bolts. I was also curious does it matter if my stuff is abs equipped and how do I know?
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
May 21, 2006
#6
  • May 21, 2006
  • #6
http://www.northracecars.com/catalog/brakes/rear/fivelugdisc/instructions.htm

I used there brakets with the hardware. You will need a flaring tool and tube cutter and 94-95 rubber brake lines. From hard lines to caliper.

I bought everything else from maximum motorsports. The 3-2 port master cylinder conversion, PV plug, adjustable proportaining valve, and front SS brake hoses.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
May 22, 2006
#7
  • May 22, 2006
  • #7
Maximum Motorsports can supply the correct front brake lines to use that will NOT require you to use an adapter on the P/S. 91-93 outer tie rod ends will have the least amount of Bump Steer.
 
You must log in or register to reply here.

Similar threads

J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
342
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
Brakes Sealant for passenger side brake line fitting? (Weatherhead 7828)
  • dan50
  • Nov 9, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
368
Fox 5.0 Mustang Tech Nov 12, 2025
dan50
Fox Brake pedal too stiff
  • keel
  • Sep 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
33
Views
986
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 11, 2026
keel
8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
635
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
430
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:51 AM
Rdub6
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?