For the parking brake cables (on 92 and earlier, '93's use a different one) you'll need two of Ford Racing # M-2809-A and one M-2810-A. The first number is the two long cables that run back to the calipers and the second one is the short one that connects them both to the parking brake handle. According to the techs at Ford Racing the flex hoses (attaching the calipers to the hardlines) that come with the Cobra conversion kit are 94-95 GT.
Here's the fun part: Starting with the parking brake handle, you're going to have to find someone who can make a small tack weld for you. Converting to rear discs on a Fox usually means defeating the self adjusting mechanism on the parking brake lever. Once the old cables are out, remove the parking brake lever and the short cable that is attached to it. The primary brake cable (the short one attached to the lever) has to be dissasembled--remove the small sheet metal bar that the two secondary (the long ones) cables were atached to and ream out the hole in the middle (11/32") to accomodate the new adjustable primary cable. The rest of the old primary won't be used, but try not to damage the rubber grommet that the primary cable passes through.