• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

5-lug swap specifics

  • Thread starter Thread starter 02silverbullet
  • Start date Start date Sep 24, 2007
0

02silverbullet

New Member
Sep 24, 2007
5
0
0
Sep 24, 2007
#1
  • Sep 24, 2007
  • #1
I my car has a 91 lx front end and 84 rear axle.
car body is actually a 84 ltd II with all the 91 suspension, engine trans dash etc.

I need the specifics of why to not use the newer spindles to do the 5 lug swap. I understand they move the wheels out further but the only people who seem to have clearence issues are the ones using 9" wide wheels up front i will be using the 01 gt 5 spoke 17"x8" wheels with 245/45/17 tires.

I have heard the newer calipers are better (aluminum and 2 piston) that is why i would rather use the newer front spindles.

Also what is required to swap the rear from drums to disks, is this do able with junk yard parts on my axle, (caliper brackets, axles, backing paltes, etc) or is something custom needed?

as my car sits now it tucks the stock 10 hole wheels with 245/60-15 like 1/8" up inside the fender at static ride height
 
0

02silverbullet

New Member
Sep 24, 2007
5
0
0
Sep 25, 2007
#2
  • Sep 25, 2007
  • #2
bump, anyone? i need to buy parts this week i would like to have this car on the road by this weekend!
here is a shot of the car and the wheels i want to use
 

Attachments

  • Jul09_0002.webp
    7.6 KB · Views: 142
  • mustangwheel.webp
    8.4 KB · Views: 148

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Sep 25, 2007
#3
  • Sep 25, 2007
  • #3
Use 94 or 95 spindle if you can. they keep you closer to stock trak.with the99 up pbr caliper.As for the rear alot of companys sell brackets to put on your axle. Or use a complete lincoln lsc or mustang rear
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Sep 25, 2007
#4
  • Sep 25, 2007
  • #4
8mm per side is what the track width is increased to. There are 25.4 mm to 1 inch. I don't think 8 millimeters (5/16") will make a whole lot of difference.
 
0

02silverbullet

New Member
Sep 24, 2007
5
0
0
Sep 25, 2007
#5
  • Sep 25, 2007
  • #5
so i use the 95 outers and rotors and can convert later to the 99 and up calipers? they just bolt up? sweet!
and so will this work to swap out the rear? 95 rear from the axles out?
or will i need special brackets?

"Up for auction is a complete 5 lug rear brake setup from a 95 Mustang.

This is complete and ready to go. This auction will include the axles, rotors, calipers,parking brake cables, backing plates, and all other mounting hardware, all you need is new pads, the rotors have a little rust from sitting, the rest is pretty rust free!!"

if i use this above setup, will i need to replace the master cylinder and add remove a proportioning valve since pressure is different with drums?
 

Attachments

  • 6c69_1.webp
    12.1 KB · Views: 127
L

lang williams

New Member
Jun 11, 2003
567
0
0
cleveland, oh
Sep 25, 2007
#6
  • Sep 25, 2007
  • #6
I believe that if you use 94/95 spindles (like I have) and 99+ bpr calibers (like is being given to me) you have to grind a little clearance on the spindles to clear the calibers. no big deal but don't freak out when its not "bolt on" if thats the stuff you go with.
 
0

02silverbullet

New Member
Sep 24, 2007
5
0
0
Sep 26, 2007
#7
  • Sep 26, 2007
  • #7
and what about the rear? is it worth the money to do a disk swap? what all is needed, will the rears of a sn95 just bolt up, and it there anyother components i need to get?
 
You must log in or register to reply here.

Similar threads

8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
631
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
245
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2026
Qtrhrse23
S
Fox Another try for the European guy to get his first Fox
  • Schargedfox
  • Aug 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
395
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 4, 2026
DadLife0724
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
266
Other Classifieds Jun 2, 2026
optionizerSS
O
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
320
Suspension Jul 23, 2026
JasonB66
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?