• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

5 speed tips...

  • Thread starter Thread starter Foxfan88
  • Start date Start date Oct 12, 2005
  • 1
  • 2
Next
1 of 2 Next Last

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Oct 12, 2005
#1
  • Oct 12, 2005
  • #1
hey soon i am getting my car swapped as you all know. I can drive a stick but i dont know how to DRIVE a stick, if you know what i mean.

its hard to explain, but what are some tips to get the most out of my car with the 5 speed. with my AOD now i just floor it and hope for the best.

only thing i can really do is punch it around 35 mph and it will downshift to 1st at 3100 so its making power. but that sucks.....

so whats a good rpm to shift?

also it will have 3.90s if that would matter...
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Oct 12, 2005
#2
  • Oct 12, 2005
  • #2
Best advice I can give you is to go slow while you learn to handle the power and control. Doing doughnuts in an empty parking lot is one thing, but driving crazy on the roads is another.

Take your time, the shifting will come naturally.



P.S. I shift (on a stock tach) @ 6200
 

notchback

Founding Member
May 30, 2000
1,950
0
36
St Clair Shores MI
Oct 12, 2005
#3
  • Oct 12, 2005
  • #3
start your shift at 5200.....a shift lite w/ a 5200 chip works great

you finish the shift about 5500-5600

launching will be a whole new experience for you....even w/ stock gears

gear it hard, get some tires, and your car will be 2 full seconds faster than it was w/ the aod
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Oct 12, 2005
#4
  • Oct 12, 2005
  • #4
well how should i lauch properly??
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Oct 12, 2005
#5
  • Oct 12, 2005
  • #5
launch?

just remember every time your tire spins, some moron it putting distance between you and them!
Jack
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Oct 12, 2005
#6
  • Oct 12, 2005
  • #6
Do not go out and try to drive like a champ. Get used to that car for at least a month before you are absolutely comfortable. Driving a 5 speed 5.0 is very different from driving half of the 5 speed 4 bangers out there. If you screw up, chances are the car will bite you back.
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Oct 12, 2005
#7
  • Oct 12, 2005
  • #7
i learned stick on a straight six f150, and it was hard to drive, than i got pretty good at it, than i bought the stang, and it was like drivin an automatic it was sooo easy lol u get used to it, u get a feel for it
 

gt40_2003wes

I did sound a wee bit gay there.
Aug 14, 2005
461
2
48
ky
Oct 12, 2005
#8
  • Oct 12, 2005
  • #8
launching is very difficult takes alot of practice and learning your car just do it alot and u will catch on just remember u dont wanna spin.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Oct 12, 2005
#9
  • Oct 12, 2005
  • #9
Yeah wait until you know how to handle the car before you start to go nuts with getting shift points and launches down.

Launch soft, get your right foot to the floor, and never let up! Kick the clutch and hit the next gear at the desired shift RPM!
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Oct 12, 2005
#10
  • Oct 12, 2005
  • #10
Driving a car is nothing you can learn from the internet.. experience will take its toll, you just need seat time.
 

LXSTASY

Founding Member
Apr 25, 2000
932
0
0
Long Island, NY
Oct 13, 2005
#11
  • Oct 13, 2005
  • #11
Agreed. Experience is the most important thing. Launching takes time. My method on the street with drag radials is bring it to 3000 and slip the clutch sorta fast so the car doesn't bog or stall, then punch it out till the next gear. With the right tire and suspension, I would love to just dump the clutch at 5000, but with stock parts it will break parts and just spin the tires. Practice
 
B

BaXTeR3221

Member
Jan 12, 2004
917
0
16
Orange County, NY
Oct 13, 2005
#12
  • Oct 13, 2005
  • #12
I agree with the other guys. Just drive around town for a couple weeks to get used to 5 speed and what the car does. Try downshifting and taking off and things like that. Once you get a feel for the car, then worry about driving agressively.
 

will1992

Member
Aug 25, 2005
123
0
16
Oct 13, 2005
#13
  • Oct 13, 2005
  • #13
powershift, its fun
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Oct 13, 2005
#14
  • Oct 13, 2005
  • #14
will1992 said:
powershift, its fun
Click to expand...


If your trans is capable of handling it. Mine however, wasn't (see sig)
 
N

niklid05

New Member
Aug 20, 2004
140
0
0
Kutztown PA 19530
Oct 13, 2005
#15
  • Oct 13, 2005
  • #15
Get used to the mustang first. Drive in all weather conditions taht the car plans on being driven in. If youre gonna drive it in rain, dont stomp on the throttle, or youre gonna watch youre rearend pass you going down the road towards that inmovable telephone pole. Play it safe, and have fun.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Oct 13, 2005
#16
  • Oct 13, 2005
  • #16
Yours wasn't, but run a stock T5 and have been powershifting for years now! Some people get lucky, some don't... I for one have had stock rear, stock tranny, and neither has had an issue! And I launch on slicks and powershift every track pass!
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Oct 13, 2005
#17
  • Oct 13, 2005
  • #17
I've also had good luck with trannys, and rear axles etc. I guess its just how you drive it!
 
9

90bronconate

New Member
Apr 24, 2005
124
0
0
Phoenix, AZ
Oct 13, 2005
#18
  • Oct 13, 2005
  • #18
Mavrick said:
Driving a car is nothing you can learn from the internet.. experience will take its toll, you just need seat time.
Click to expand...
totally true. i just went to the track for the first time last weekend and launching is a lot harder than it sounds on here. my best 60' was a 2.4 lol.
 

will1992

Member
Aug 25, 2005
123
0
16
Oct 13, 2005
#19
  • Oct 13, 2005
  • #19
srothfuss said:
If your trans is capable of handling it. Mine however, wasn't (see sig)
Click to expand...
that sucks man, the funny thing is i had to rebuild my tranny too, i slammed the ***** out of it into gear and broke the plastic pieces on the shift fork, but a short throw will fix that
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Oct 13, 2005
#20
  • Oct 13, 2005
  • #20
Ive been trying to kill my tranny over the past summer. I powershift the **** out of the thing and it just comes back for more. The reason that I am ditching it is because the second gear synchro is shot and its just easier to throw in another tranny.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
884
Fox 5.0 Mustang Tech Jun 14, 2026
Mindseye007
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
552
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
J
1998 v6 5-speed automatic transmission
  • Jude Thaddeus 1
  • Jan 14, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
259
1996 - 2004 SN95 Mustang -General/Talk- Jan 21, 2026
Noobz347
B
SOLD 1986 Mercury Capri 5.0 5-speed
  • blackmerc
  • Jul 29, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
16
Views
679
Fox Body Mustangs For Sale (1979-93) Aug 24, 2026
General karthief
C
Drivetrain T-5 transmission issue
  • Ch3No2
  • Jul 11, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
412
Fox 5.0 Mustang Tech Jul 18, 2025
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?