51014 lunati help

[guesscrazy]

Is this a good combo?1.9 Edelbrock RPM heads, Weiand Stealth,600 cfm vac sec. carb,stock bottom end 88 rollerblock, c-4 auto with 2200 stall converter, 355 rear gears and this cam?Going in a 68 stang for street and strip use.What kind of times can I shoot for in the qtr. and 8th.Been out of rodding for 25 years but my teenage son has sparked my interest in a father and son project. Will this combo pull 350 hp?

 

[91 HATCH]

Is this a good combo?1.9 Edelbrock RPM heads, Weiand Stealth,600 cfm vac sec. carb,stock bottom end 88 rollerblock, c-4 auto with 2200 stall converter, 355 rear gears and this cam?Going in a 68 stang for street and strip use.What kind of times can I shoot for in the qtr. and 8th.Been out of rodding for 25 years but my teenage son has sparked my interest in a father and son project. Will this combo pull 350 hp?

350 hp i dont ? you should use trick flow track heat heads #5140 or #5141 with o-ring grooves ,edelbrock victor jr intake,750 mech secondary holley,trick flow cam #5140202, 3,000 to 3,500 stall convertor, atleast 10:1 compression and 3.90 to 4.11 gears i dont know a time on this but it will be bad a**

that cam will require aftermarket pistons