• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

5th Gear Concern

  • Thread starter Thread starter Acid7711
  • Start date Start date Oct 9, 2005
A

Acid7711

Member
Sep 4, 2005
41
0
6
TN
Oct 9, 2005
#1
  • Oct 9, 2005
  • #1
Lately, I've noticed that if I shift into 5th gear going bellow 50mph that if I try to accelerate a little harder than normal, it sometimes seems to "slip" for a second. Just a split second, then goes then sometimes once or twice more. What is causing this? It's a really annoying feeling. It only does it in 5th gear. Every gear goes in without crunching and feels really nice. Could it just be a clutch out of adjustment? I've heard the stock setup sucks for that. I hope it isn't anything bad. Car is basically stock with only an h-pipe and catback.

Thanks in advance.
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Oct 9, 2005
#2
  • Oct 9, 2005
  • #2
I dont know about that but you are seriously lugging the car around if you have stock gears and are shifting into 5th at 50mph
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Oct 9, 2005
#3
  • Oct 9, 2005
  • #3
what are the rpms at in 5th when you shift at 50mph? im sure if you have stock gears you would be right around 1000rpm. thats a little low to accelerate fast in fifth....even for a mustang.
 
A

Acid7711

Member
Sep 4, 2005
41
0
6
TN
Oct 9, 2005
#4
  • Oct 9, 2005
  • #4
I think it's about 1500-1600rpms. Maybe that's just it. I'm used to driving a higher reving import and this thing seems like it likes to be shifted at about 2k. What does everyone recommend a good rpm to shift at? I try to baby this car and not drive it hard, keeping the revs low for the most part. It just seems to me that after like 2k, it sounds like it wants to be in the next gear, and when I shift around 2k in 4th gear, it puts 5th at about 1600ishrpms.

I really don't know what gears are in there now. I have 3.73's waiting to be installed in a week and a half. Saving up money. I hope it doesn't already have 3.73's in there.
 
N

niklid05

New Member
Aug 20, 2004
140
0
0
Kutztown PA 19530
Oct 9, 2005
#5
  • Oct 9, 2005
  • #5
not to highjack, but is it possible to swap in a smaller 5th gear than whats in stock?
 

maverick0716

Founding Member
Jan 12, 2002
3,924
0
56
Chilliwack, BC, Canada
Oct 9, 2005
#6
  • Oct 9, 2005
  • #6
Sounds like a slipping clutch to me
 

maverick0716

Founding Member
Jan 12, 2002
3,924
0
56
Chilliwack, BC, Canada
Oct 9, 2005
#7
  • Oct 9, 2005
  • #7
Acid7711 said:
I think it's about 1500-1600rpms. Maybe that's just it. I'm used to driving a higher reving import and this thing seems like it likes to be shifted at about 2k. What does everyone recommend a good rpm to shift at? I try to baby this car and not drive it hard, keeping the revs low for the most part. It just seems to me that after like 2k, it sounds like it wants to be in the next gear, and when I shift around 2k in 4th gear, it puts 5th at about 1600ishrpms.

I really don't know what gears are in there now. I have 3.73's waiting to be installed in a week and a half. Saving up money. I hope it doesn't already have 3.73's in there.
Click to expand...

I agree with you on the shift point....I can't stand cruising at over 2000 rpm in town....5th gear is different however. The 5th gear in our cars is quite a drop from 4th gear, so you'll have to rev 4th a little longer than the other gears.
 
A

Acid7711

Member
Sep 4, 2005
41
0
6
TN
Oct 9, 2005
#8
  • Oct 9, 2005
  • #8
Ok, That's what I was thinkin, maybe just hold 4th out because I did notice, like you said, 5th really throws the revs way down. When I ride 4th until about 55 and on, it goes right in and rpms are nice. Doesn't do that slipping thing it was before.

I really hope it's not a slipping clutch. The guy who I bought the car from (friend and reputable) told me he installed a heavier than stock clutch into it not very long ago.
 
You must log in or register to reply here.

Similar threads

S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
907
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Drivetrain Fox Power Loss While In Gear
  • J_5.0_VERT
  • Dec 17, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2024
J_5.0_VERT
K
Intense Shaking problem
  • KP_NewEdge
  • Jun 11, 2025
  • SN95 V6 Mustang Tech
Replies
1
Views
371
SN95 V6 Mustang Tech Jun 11, 2025
gkomo
B
Questions About T5 Manual
  • Blackout67
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
795
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
461
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?