600rwhp fuel upgrades

stangJunkie04

New Member

Jul 11, 2005

44

1

0

Vernon, CT

May 1, 2008

#1

• May 1, 2008

• #1

I am going to be upgrading my S-Trim to a T-trim in my goal to reach 600rwhp w/out spraying my Intercooler. My current fuel setup is 03 cobra tank, twin svt focus pumps,KB BAP, and 60lb injectors stock fuel rails. Will this safely supply enough fuel for 600rwhp or do I need to upgrade some components. I am confident the T-trim will make the power I just want to make sure the rest of the setup can support it.

 

ProCharger GT

Member

Jun 3, 2004

153

0

16

Cleveland

May 1, 2008

#2

• May 1, 2008

• #2

You have a good fuel system, the only other things I can think of would be some CPR fuel rails and a MAF.

 

stangJunkie04

New Member

Jul 11, 2005

44

1

0

Vernon, CT

May 1, 2008

#3

• May 1, 2008

• #3

ProCharger GT said:

You have a good fuel system, the only other things I can think of would be some CPR fuel rails and a MAF.

Click to expand...

The lightning 90mm MAF wont support 600rwhp?

 

D

darkside03gt

Member

Feb 19, 2007

851

8

18

Sacramento CA

May 1, 2008

#4

• May 1, 2008

• #4

stangJunkie04 said:

The lightning 90mm MAF wont support 600rwhp?

Click to expand...

NO. they max around 420 rwhp

 

oxfordgt

Member

Apr 30, 2006

288

2

18

Clarksville, TN

May 2, 2008

#5

• May 2, 2008

• #5

+1 you will need to upgrade the MAF and also upgrade the rails and lines. If I were you I would upgrade to twin GT40 pumps.

 

the98stang

Active Member

Aug 12, 2005

2,408

0

47

Clovis, CA

May 2, 2008

#6

• May 2, 2008

• #6

oxfordgt said:

+1 you will need to upgrade the MAF and also upgrade the rails and lines. If I were you I would upgrade to twin GT40 pumps.

Click to expand...

Those pumps don't do all that well unless you have an upgraded FPDM or dual FPDM setup would get's pretty expensive. Twin SVT pumps with a BAP could easily handle 600-650 whp.

 

jivepepper

Founding Member

Jun 19, 2002

776

5

18

Under a Sombrero. in WV.

May 3, 2008

#7

• May 3, 2008

• #7

Right now I'm at 515 with 42's BAP and dual Cobra pumps. I plan going to 60's this month and new stage 3 heads from mmr. That should get me close to 600. I think you should fine. Do you still have the PPRV in the tank? Removing mine helped to free up a little duty cycle,

 

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

May 3, 2008

#8

• May 3, 2008

• #8

i'm running a cobra tank, twin GT pumps, PPRV delete, modded FPDM, 8ga. wire to the pumps, CPR rails, 60# injectors and 8 AN lines.

i've been told my setup should go 650 with ease. i would ditch the focus pumps and get a pair of GT pumps