65, 70, 75mm Throttle bodies for 94-95's on E-bay

[zenboy99]

FYI: There are a ton of 94-95 throttle bodies on E-bay 65, 70, 75mm by Professional Products for $139.99. Seems like a good deal, I ordered one and got it in 3 days. Real nice polish finish to it, I'll try to post pics later.

http://www.professional-products.com/throttlebodies.htm

 

[Rootus]

Just keep in mind that it is likely that the 94/95 elbow itself makes getting anything bigger than 65 pointless.

Dave

 

[zenboy99]

Just keep in mind that it is likely that the 94/95 elbow itself makes getting anything bigger than 65 pointless.

Unless you have a Dremmel tool

 

[VibrantRedGT]

There cheap because they are well cheap. Find a FMS or BBK. Much better quality then the PPI ones. Minimum is 70MM. Hog out the elbow.

 

[BlackVert]

Just keep in mind that it is likely that the 94/95 elbow itself makes getting anything bigger than 65 pointless.

Dave

mine is 70mm...

 

[AznStanger3v]

my trickflow elbow is 75mm and my tb is 70

 

[deadly97snake]

my trickflow elbow is 75mm and my tb is 70

I am about ready to buy an intake and TB in the next week. I know that summit sells these bare Trickflow elbows for 89.95. They advertise that they are 75mm. Are they bigger than others or are all adapters 75mm? Also what size TB should I go with?

 

[deadly97snake]

I am about ready to buy an intake and TB in the next week. I know that summit sells these bare Trickflow elbows for 89.95. They advertise that they are 75mm. Are they bigger than others or are all adapters 75mm? Also what size TB should I go with?

anybody?

 

[Grn92LX]

You dont need a TB or a elbow yet, you dont even have an intake. Its a waste to put bigger TB on when you stock inlet is only 60mm. Rule of thumb by people who know what their talking about, match your TB to the inlet size of your aftermarket manifold

 

[deadly97snake]

You dont need a TB or a elbow yet, you dont even have an intake. Its a waste to put bigger TB on when you stock inlet is only 60mm. Rule of thumb by people who know what their talking about, match your TB to the inlet size of your aftermarket manifold

Ok I am gonna buy an Edelbrock performer 5.0 or cobra intake within the next 3-5 days. What size is the inlet of those intakes?

 

[chefster]

what is this elbow you are talking about,..I have a cobra[94] what tb should I put on it

 

[95snoozer]

someone buy my 70

 

[chefster]

what would your 70 do for my COBRA

 

[95snoozer]

I HAVE A 70 BBK EDLEBROCK ELBOW AND TB

SORRY ABOUT ALL CAPS

 

[95snoozer]

what do you mean what will it do?

 

[chefster]

well i have all stock now,except for ram air,how will it change my performance

 

[raven69david]

well i have all stock now,except for ram air,how will it change my performance

It will do very little to improve your performance. Gains will be minimal at best with a throttle body that big for your otherwise stock motor.

 

[raven69david]

DP

 

[Grn92LX]

what is this elbow you are talking about,..I have a cobra[94] what tb should I put on it

Those intakes use 70mm because thats what the opening is.

 

[zenboy99]

Horsepower TV put a throttle body on a mostly stock GT and saw a couple horsepower gain, barely noticeable.