Im trying to locate a part... L/R windshield pillars for a 67 mustang...i found the moldings and pads but i need the actual pillars...are you able to help me with that or direct me to a place that may have them? please! its a fathers day presentHi guys, I parted out many many mustangs back in the 1970's - 80's and early 90's, I kept most everything for many years, finally hauled several loads to the crusher, just before everyone started needing those parts. Luckily, I did keep about 240 doors as now people back east and around the world are needing them. I also kept lots of convertible parts like windshield frames and top halves of the sheet metal body's, also have a complete kit for coupe to retractable top convertible, never got to use it. Am 81 now and still trying to restore some, but know I'll never use most of what I have. Only thing I've found good about California since living here from 1957, is we have excellent sheet metal. Good luck on your interesting builds. Harry
I have one set left ,they are Dynacorn .if you message me i will give you a priceIm trying to locate a part... L/R windshield pillars for a 67 mustang...i found the moldings and pads but i need the actual pillars...are you able to help me with that or direct me to a place that may have them? please! its a fathers day present
im messaging you...you actually have the pillars? left and right? Seriously? That would be a blessing (well if they are affordable...lol)I have one set left ,they are Dynacorn .if you message me i will give you a price
Hi guys, I parted out many many mustangs back in the 1970's - 80's and early 90's, I kept most everything for many years, finally hauled several loads to the crusher, just before everyone started needing those parts. Luckily, I did keep about 240 doors as now people back east and around the world are needing them. I also kept lots of convertible parts like windshield frames and top halves of the sheet metal body's, also have a complete kit for coupe to retractable top convertible, never got to use it. Am 81 now and still trying to restore some, but know I'll never use most of what I have. Only thing I've found good about California since living here from 1957, is we have excellent sheet metal. Good luck on your interesting builds.
I know it's a few years later, but I'm now having the same problem as this gent that started this thread. I need windshield, or A pillar for both sides of a 66. Any chance you may still have them or know a source?I have one set left ,they are Dynacorn .if you message me i will give you a price
I know this is an older thread, but any chance in the years since you've accumulated any more of these pillars? I need both left and right because the turn that goes under the cowl is foul on both mine. I tried making them but my skills suck.I did this 67 fastback a couple of months ago .The posts go all the way into the roof structure ,i thought i had another set but this must have been my last ones .
If you still have these I am interestedI have a pair of Dynacorn ,they are spot welded to the door post on 2 new dynacorn side assemblies . I can drill them loose it would be like having the plug weld holes already there . Message me if you need them
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?