67 and 92 bolt pattern

[SLVRBOY]

now that the wheel choice and size are made i was wondering if all mustangs from 67 to 03 have 5 on 4.5 bolt pattern. the front of mine is from a 1968 v8 car and the rearend is out of a 1992 gt. i just need to make sure the bolt patterns are the same.

thanks guys

 

[Rusty67]

If the rear axle is out of a 92 then you are running a fox body 8.8. Fox body Mustangs were 4 lugs if I'm not mistaken. If it is a 5 flug axle then they converted the rear end to the 94-98 axles which are the same physically but are 5 lug patern instead of 4 lug. The are 5x4.5 so it is the same, according to this scenario.

 

[LMan]

Rusty is right.

92GT rear = 4 lugs
67 V8 Mustang = 5 lugs

 

[SLVRBOY]

i forgot to say that i did do a 5 lug conversion.
if im not mistaken i think the 92 rearend i .5 wider on each side than the stock 67 v8 rear. this would also affect my backspacing.

 

[5.0ina66]

i forgot to say that i did do a 5 lug conversion.
if im not mistaken i think the 92 rearend i .5 wider on each side than the stock 67 v8 rear. this would also affect my backspacing.

Nope, the stock fox rear is the same length as the 67-70 Mustang. If you 5-lugged it with SVO/Lincoln stuff or 94-98 stuff, yes its wider. If you used ranger stuff its correct length.