My 66 was purchased with a 68 302 already in it. It was also converted over to have 66 factory a/c. I noticed when I was replacing my timing chain that none of the belts align up correctly. Someone has tried to make brackets, but they were not made very well. Also the crank pulley was not correct for the 68 motor, so I purchased a used crank pulley that is correct for the 68 motor with 3 grooves in it. After intalling the crank pulley I noticed that the compressor pulley and the crank pulley are way off. It looks like the compressor would need to come out closer to the front of the car about 1/2".
Has anyone ever had this problem? I am not sure what to do?
Has anyone ever had this problem? I am not sure what to do?