'72 Mach help

Well the correct way to do it is to remove the back glass, pull it tight, glue it into position and re-install the glass. I was too lazy to do this so I just glued it up and tucked it under the weatherstripping using a putty knife. Same with the side sail panels, just tuck the extra fabric under the rubber weatherstrip. There is not much room to work but you just need to take your time.

It has heald tight for over a year with no problems at all. If you need a better explanation let me know and maybe I can get some pics.

Hope that helps,

Josh

Which pillar did you break? I may have a couple leads on some.