`76 Mustang rear

C

C6AE

Member

Mar 22, 2004

145

1

17

Ma.

Oct 18, 2004

#1

• Oct 18, 2004

• #1

I picked one up at a swap meet. I thought it had the same bolt pattern as an early 4 lug wheel (`66) but was told by someone that this is incorrect.
Were they right?
If so does anybody need an 8" rear 3.00:1 open in northeast?

 

C

cobraii351

Founding Member

Jan 10, 2000

1,104

4

39

Altoona, PA

Oct 18, 2004

#2

• Oct 18, 2004

• #2

You heard correct but yes too late. the early 4 bolt pattern and the 74+ are different. You could swap the axles but I'm not sure if the early 8" came in 4 bolt or not.

 

D

dmoody

Founding Member

Nov 4, 2002

789

0

17

Winston-Salem, NC

Oct 18, 2004

#3

• Oct 18, 2004

• #3

I've never seen an early 8" with four bolts. If a Mustang came with an 8" I think you'll find it is a 5-lug with a V-8. If it had an inline six then it had four lugs and a diff with one of those bolt-on covers.

d

 

C

C6AE

Member

Mar 22, 2004

145

1

17

Ma.

Oct 19, 2004

#4

• Oct 19, 2004

• #4

dmoody said:

I've never seen an early 8" with four bolts. If a Mustang came with an 8" I think you'll find it is a 5-lug with a V-8. If it had an inline six then it had four lugs and a diff with one of those bolt-on covers.

d

Click to expand...

Nope, definately 8" with 4 bolt pattern
It`s about 1/2" smaller overall than a `66 4 bolt pattern

BTW the tag reads 3 00 8
Open 8"

 

Power Surge

Founding Member

Jul 20, 2002

1,516

4

38

Palm Coast, FL

Oct 19, 2004

#5

• Oct 19, 2004

• #5

I had a 66 Mustang with the 6 cyl in it, and it was 4 lug, but had the 7.5 rear in it. My brother has a Falcon with an 8" rear, but it's 5 lug, small circle. I know some MII owners talk about using the early Mustang 8" axles for a budget 5 lug conversion, so I think Dmoody is right.

If you need to stick with 4 lug, why not just redrill them with the proper pattern?

 

J

jshcobra

Founding Member

Jul 5, 2000

720

0

0

Oct 19, 2004

#6

• Oct 19, 2004

• #6

Early Mustangs with 6cyl. engines had 4 lug 8" rears. The bolt pattern was 4 x 4.5. Mustang II 4 luggers are 4 x 4.25. The axles are not interchangeable due to different bearing diameters.

 

welder4956

20+ Year Stangneter

Nov 28, 2003

230

95

38

Birmingham, AL

Oct 19, 2004

#7

• Oct 19, 2004

• #7

jshcobra said:

Early Mustangs with 6cyl. engines had 4 lug 8" rears. The bolt pattern was 4 x 4.5. Mustang II 4 luggers are 4 x 4.25. The axles are not interchangeable due to different bearing diameters.

Click to expand...

Sorry, the early Falcons and Mustangs with 6 cyl. came with a 4-lug rear end, but they were 7.5". There were no early 8" 4-lug rears.