• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

76mm C&L MAF

  • Thread starter Thread starter SteedaGT9150
  • Start date Start date Aug 20, 2007

SteedaGT9150

Advanced Member
Nov 10, 2004
1,351
59
68
Maryland
Aug 20, 2007
#1
  • Aug 20, 2007
  • #1
getting ready to order one soon. anyone have any pros/cons? also would it be a good idea to go ahead and get a tb and egr spacer? 70mm good?
 

ACSPONY

20+ Year Stangneter
Oct 10, 2004
711
2
19
Ohio
Aug 20, 2007
#2
  • Aug 20, 2007
  • #2
I've got the 73, with a 76 on the GT40. Throttle response is good and I've never had any problems with the C&L.
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Aug 20, 2007
#3
  • Aug 20, 2007
  • #3
Search for MAF on here and you'll hear all sorts of horror stories about them, you'll also see a slew of people that use them with no problems. I ended up going with a 70mm Pro-M and have had no problems!
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Aug 20, 2007
#4
  • Aug 20, 2007
  • #4
Yea i would do some serious research before you go ahead an order a C&L...like flavadave said, some people run them with no problems....some people have horrible rich conditions and raging surging idle syndrome. I think pro-m...or professional mass air systems (PMAS) are the best meters out there. Im running there 75mm unit with no problems. Check out their site before you settle on a C&L. good luck man
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Aug 20, 2007
#5
  • Aug 20, 2007
  • #5
I would go the 94/95 Mustang 70mm route!
 

grey5.0beast

Cookies should never be DUNKED!!!
Aug 3, 2004
0
1
0
atl ga
Aug 20, 2007
#6
  • Aug 20, 2007
  • #6


I picked up mine for 20 bucks at the pullapart and it works awesome!!
 

montegoman351

Member
Jan 12, 2007
169
1
18
Aug 20, 2007
#7
  • Aug 20, 2007
  • #7
I've got one on my less-than-common setup (see sig) and it runs great. I'm running it with 30lb/hr injectors. I'll probably end up getting a TwEECer, and a bigger fuel pump, the FP I have now is strugglin' to keep up with the 357C and
30lb injectors. I've done a bunch of work since I built the EFI setup, I'm working on an intake now with 2" runners and a large upper plentum, with (when I find one) a cobra twin throttle body. I've got a single 70mm TB on it now, that's going on my mom's '01 CV P71, when I finish up my intake and throw in my Lunati cam.
 

Skoobie

Damn...Tyler65's hot!
May 25, 2003
655
0
17
Vancouver, WA
Aug 20, 2007
#8
  • Aug 20, 2007
  • #8
I have a 76mm and it went in the pooper. My low end dissapeared and my idles was all over the place. Didnt have the cash to replace it so I just pulled the sensor out of a stock 19# unit and dropped it into the C&L housing...PRESTO! I am NOT impressed with C&L electronics...although I dont mind using their housings hehe
 

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
Aug 21, 2007
#9
  • Aug 21, 2007
  • #9
I run the C&L 76mm and I did have a few problems with it when I first installed it.

Rotating the housing helped alot as did resetting the idle and TPS.

Runs great now. I think the C&L is a great piece for the $$ and for the person who isnt going to heavily moddify their stang.

Now if/when I go to a turbo setup I will be installing a PMAS or equivalent MAF that will allow for more precise tuning and adjustment.

But for a mostly stock engine the C&L is perfect.
 
You must log in or register to reply here.

Similar threads

S
Best Ebay aftermarket Radio/screen
  • Shurkeel
  • Oct 8, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
142
2005 - 2014 S-197 Mustang -General/Talk- Oct 9, 2026
gkomo
T
  • Locked
Digital Tuning A9l issue or something else
  • Tufgriz
  • Sep 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
372
Fox 5.0 Mustang Tech Sep 11, 2025
Noobz347
T
Fuel Looking for a little guidance
  • Tufgriz
  • Sep 11, 2025
  • Fox 5.0 Mustang Tech
Replies
9
Views
485
Fox 5.0 Mustang Tech Sep 12, 2025
Noobz347
G
Engine ECU Question
  • GeorgeE
  • Oct 12, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
715
Fox 5.0 Mustang Tech Oct 19, 2026
JD1964
H
97 cobra maf sensor help
  • Hopper1979
  • Oct 16, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
167
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?