8.8 rear end rebuild

J

jaackal

New Member

May 12, 2003

402

0

0

NJ

Nov 25, 2004

#1

• Nov 25, 2004

• #1

my trac lock unit is shot...i got the one wheel blues my question is should i just get new clutches for the track lok unit or should i do all the bearings and all that good stuff. also if theres a part number/where to get a good heavy duty rebuild kit let me know...im also going to put some 3.73s in to replace the stock 2.73 highway cruisers..also have 135k on the car too

 

BlownStangGT

REPEAT

Founding Member

Jan 22, 2002

3,860

6

58

Lancaster, PA

Nov 25, 2004

#2

• Nov 25, 2004

• #2

I have 110k miles on my car and I have done the clutch rebuild without any problems. You might as well replace the bearings while you are at it to be on the safe side

 

J

jaackal

New Member

May 12, 2003

402

0

0

NJ

Nov 25, 2004

#3

• Nov 25, 2004

• #3

any body know of any good kits out there for bearings and a clutch kit?

 

I

Idwitheld-1`

New Member

Nov 30, 2003

335

0

0

Portland Oregon

Nov 25, 2004

#4

• Nov 25, 2004

• #4

raytech

look at summitracing.com

They have several levels of rebuild kits.
Replace the wheel bearings and seals while your at it.

 

J

jaackal

New Member

May 12, 2003

402

0

0

NJ

Nov 25, 2004

#5

• Nov 25, 2004

• #5

how many splines is the stock rear 28 or 30

 

squeeeg

Founding Member

Jul 4, 2000

1,905

0

0

Michigan

Nov 25, 2004

#6

• Nov 25, 2004

• #6

stock rear is 28.

 

4dStang

Banned

Oct 23, 2002

718

1

0

Near St Louis, Missouri

Nov 25, 2004

#7

• Nov 25, 2004

• #7

jaackal said:

my trac lock unit is shot...i got the one wheel blues my question is should i just get new clutches for the track lok unit or should i do all the bearings and all that good stuff. also if theres a part number/where to get a good heavy duty rebuild kit let me know...im also going to put some 3.73s in to replace the stock 2.73 highway cruisers..also have 135k on the car too

Click to expand...

Call Randy's ring and pinion. They have all the bearings, clutches, and gears needed for the change. Not badly priced either.

Rear end bearings have a long life and don't neccecerily need to be changed even at 110 K miles. Just not really any wear in the pumpkin. Those bearings will go for a million miles but if you want to change them, its your money. I am getting my 3.73's in on Monday and it runs $175 for an expert racer mechanic to install them correct. It is usually another 100-150 bucks for bearing and clutch rebuild.

 

OL' WHITEY

New Member

Jan 28, 2004

273

0

0

Weddington, NC

Nov 26, 2004

#8

• Nov 26, 2004

• #8

Get the rebuild kit from your local Ford Dealer. It's around $60. You might want to do a search on this site for "Trac-loc rebuild." There was a lot of discussion about this a month or two ago when a couple of us were doing the rebuild. I posted lots of instructions on how to do this by reusing two of the old clutches with your new kit to make the rear lock tighter and faster. It's a good upgrade and worth the trouble. The pumpkin bearings probably don't need to be replaced, but you might want to replace the outer axle bearings. They tend to go bad long before the pumpkin bearings do. It will require a bearing puller and press.

 

S

SlowGT

Founding Member

Jun 17, 1999

826

0

0

Columbia Co, PA

Nov 26, 2004

#9

• Nov 26, 2004

• #9

eBaymotors 8.8 rebuild search

FMS rebuild kit @ $40

Do yourself a favor and get the rebuild kit with 8 clutches. Ditch a steel spacer from each side and intall the 2 extra clutches instead. Here are some 8.8 Rebuild guidelines I wrote up a while back.