Hello.
I am in the process of rebuilding a 1985 302 when I discovered a large scratch, possibly crack in one of the cylinders. I had already ordered AFR 165 heads for the flat tappet build. I can buy a 1995 block that has been recently bored .30 over. The 1985 302 is also .30 over. Can I just swap the parts to the 1995 block. I understand that I will need longer push rods. I already have the cam kit and crane roller rockers. This will be a carbed 302. Any advice is appreciated.
I am in the process of rebuilding a 1985 302 when I discovered a large scratch, possibly crack in one of the cylinders. I had already ordered AFR 165 heads for the flat tappet build. I can buy a 1995 block that has been recently bored .30 over. The 1985 302 is also .30 over. Can I just swap the parts to the 1995 block. I understand that I will need longer push rods. I already have the cam kit and crane roller rockers. This will be a carbed 302. Any advice is appreciated.