• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

86 Stang with very high Hydrocarbons

  • Thread starter Thread starter 93 LX
  • Start date Start date Jun 19, 2007

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jun 19, 2007
#1
  • Jun 19, 2007
  • #1
I took my 86 5.0L to the smog shop. I mentioned that I thought it was running rich but the smog guy said he thought it was buring oil and having a mis fire. I have done the cap, rotor plugs and wires. I have not done a compression test yet or looked at the current set of plugs. The CO was well within the passing range just the HCs were way out of wack.

Any ideas on how to track this down? The smog guy said he thought it could be rings ro valve seals but he also mentioned that the cats may be shot as well. They are 21 years old.

BTW the only codes are 44 and 94 KOER no codes on KOEO

one more thing:
both O2 sensors, EGR, EVR Sensor, ECT, ACT, PCV and TPS have been changed. EVP, TAB and TAD solenoids have been replace and with a vacuum guage have been verified working.
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
314
281
134
Apache Junction, AZ
Jun 19, 2007
#2
  • Jun 19, 2007
  • #2
You've pretty much picked the same guesses that I have as suspect for the case of Frankenstang's '86 GT 'vert:
- Valve guide seals
- Worn rings (blowby, burning oil)
- Plugged cats (as a result of the first two items)

Also, speed density 5.0's tend to run rich by default, compared to MAF-equipped 5.0's, so that might play a factor, as well.

Maybe try giving the top-end a thorough douche (or two) with Seafoam and/or some throttle body cleaner - hose out the intake, IAC and EGR passages, and make sure your PCV valve screen isn't plugged up solid with gunk (and that the PCV valve is still functional/clean). Frankie's '86 was close enough on its last run after we gave it a full tune-up and swapped on my cat'ed X-pipe that we could probably get it to squeak by just by adding a bit of acetone and maybe backing off the timing a little more - might help with your car's situation, as well...?
 

FrankenStang

Now, give me a damn CT!
15 Year Member
Apr 16, 2005
4,461
70
129
Florence, Az
Jun 19, 2007
#3
  • Jun 19, 2007
  • #3
I feel your pain, man. I feel your pain.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jun 19, 2007
#4
  • Jun 19, 2007
  • #4
I got it passed by way of.. well you know. I just need to get this running a bit better. I will try to get this damn thing done and maybe for giggles get a H-pipe for it.

Allen

BTW it wasnt running rich, in fact the smog guy said that the fuel management was working perfectly. The smell is buring oil mixed with the fuel. He also said check to make sure the smog pump is actually blowing air. IT turns but I never hear the dump valve dumping excess air on decel.
 
You must log in or register to reply here.

Similar threads

Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
C
Engine Code 94 and 13
  • CmdrDerp
  • Nov 3, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
354
Fox 5.0 Mustang Tech Nov 4, 2024
AeroCoupe
J
Thanks for the information on codes 31,34,44 and 94!
  • JK86LX50
  • Mar 5, 2025
  • The Welcome Wagon
Replies
3
Views
293
The Welcome Wagon Aug 5, 2025
gkomo
A
Resolved 1989 Mustang bogs down after 3-5 minutes of driving.
  • Alabama
  • Feb 11, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
2K
Fox 5.0 Mustang Tech May 26, 2025
limp
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
999
Fox 5.0 Mustang Tech Oct 16, 2024
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?