• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

86 Vert - Installing Eibachs & Have Steering Rack ?

  • Thread starter Thread starter MattLag
  • Start date Start date May 29, 2008
M

MattLag

Member
Jan 31, 2002
25
7
13
Chicago, IL
May 29, 2008
#1
  • May 29, 2008
  • #1
I have 3 of the 4 springs on the car - only one left is the front driver's side.

I am using the OTC tool to compress spring and then taking out 2 bolts from A Arm into the K Member. On the 86, the LCA bolt will hit the steering rack if I try to get it out. For those who have done this before, would you recommend taking out the whole steering rack or will loosing it up be enough to clear?

Thanks for your help in advance.
 
T

*TURBO GT*

Banned
May 26, 2008
13
0
0
ILLINOIS
May 29, 2008
#2
  • May 29, 2008
  • #2
I removed the ball joint end when i done mine u should do that unless u are changing bushings but there is only a few bolts to remove the steering rack so


my bolts clear the rack though but i have a 93 so maybe the 86 was different
 

1993SSP

Founding Member
Sep 5, 2001
1,194
0
37
Ky
May 29, 2008
#3
  • May 29, 2008
  • #3
No need to remove the rack, you will have to take the bolts out holding it and pry it out some to get them to clear, if you use the hose clamp trick on the front coils each side can be done in 20 min or so, no need in taking out the a arm bolts
 

stang&2Birds

Founding Member
May 4, 2000
2,091
5
58
New England. :-) CT/MA
May 30, 2008
#4
  • May 30, 2008
  • #4
MattLag said:
only one left is the front driver's side.
Click to expand...
Don't you love that bolt and it's location? NOT!

Yea, most people don't realize the differences between the different years.

When I did my '86, I got so much incorrect advice/information, it was amazing.

FWIW: The pre '87's have a shorter k-frame. That means that the FCA mounting points are moved inward. That means the the front driver's side FCA bolt will not come out with the rack installed. Sorry, not in this reality, it won't. Well, that's assuming the bolt is stock in in it's stock orientation.

Living in New England, 3 out of the 4 FCA bolts had to be cut out. Of course, the one bolt that didn't have to be cut required that I move/drop the rack. Figures, huh!

When you install that FCA bolt, I suggest you do what I did.
o First, put the nut on the bolt.
o Cut the bolt "as needed".
o Install the front bolt so that the head is inwards and the nut is next to the rack.

That way, you never have to drop the rack again to take out that bolt. Be careful about the bolt length. If it's too long, it'll hit the rack. If it's too short, the nut won't be grabbing all threads. It only takes 1-3 cuts. The cuts are quick to do. So, only cut a little each time.

I think I had to pull the rack all of the way off it's mounting studs to remove the bolt. Sorry, I forget. I do remember that I had to loosen the "rag joint".

Good Luck!
 
You must log in or register to reply here.

Similar threads

Suspension 87 steering wheel slightly wobbles after new Rag joint install
  • R82148V
  • Jun 16, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jun 24, 2025
R82148V
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
392
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 8, 2026
bjornsn95
B
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
464
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
508
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?