For determining which gear you need: http://www.latemodelrestoration.com/buyersguide/speedo-gear.aspx
For an AOD you just replace the gear on the end of the speedometer that goes into the transmission.
For a T5 you replace that gear and the gear on the tailshaft in the transmission.
You have to pull the vss from the sode of the trans and look in there to see what color the drive gear is - then use the selction charts to match up the right driven gear. I have a Yellow 7 tooth drive gear with 3:73s so I used a red 21 tooth driven gear.
Sweet thanks I got a question about my horn it blow sthe fuse when depressed? Also I want a new bbk H pipe they are all 2.5" I just bought a new flowmaster cat back and it is flared to fit over my stock H pipe, is there a way tomake the new 2.5 hpipe work?
my horns blew fuses becasue they were shorted out - put new ones in and problem gone. If the H and catback are made in two different sizes, you need to make a change in one of them unless you want a muffler shop to make them work.