89 Mustang GT Side Exhaust ?

qcrun98 · Dec 24, 2005

Just wondering if anyone has ever done a side exhaust setup on an F-Body mustang? How it sounds? Looks? Clearance?

My current setup is BBK Headers, Custom H-Pipe, Full Dynomax Exhaust.

Looking at getting Flowmaster 40 Series exiting before the rear tires. Any info, pics, sound clips would be great. Thanks Alot.

RacEoHolic330 · Dec 24, 2005

A member who got banned on here did it (Joe). He had a lot of ground clearance problems with speed bumps and driveways and such. Also, I didn't really think they looked all that great.

oh and by the way, its a FOX body, not an F-body. We drive mustangs in here, not camaros.

qcrun98 · Dec 24, 2005

sorry man I ment to put Fox Body was just abbreviating the word and didn't think about it. Thanks for the info on the clearance. I may just stick with dumps under the car so it won't end up looking bad.

Michael Yount · Dec 24, 2005

Spin Tech makes a bolt on side exhaust for the fox bodies -- check out their website. I think it's www.spin-tech.com

qcrun98 · Dec 24, 2005

thanks man I will definetly check it out

qcrun98 · Dec 24, 2005

http://www.spintechmufflers.com/

sgarlic · Dec 24, 2005

qcrun98 said:
My current setup is BBK Headers, Custom H-Pipe, Full Dynomax Exhaust.

If you have full dynomax exhaust, wouldn't that mean you'd have dynomax headers and midpipe too?

carbed 85 gt · Dec 24, 2005

I saw one that was fabricated not for the faint of heart. I think his screen name is 393 Bird. This guy has an MN12 thunderbird and had the exhaust come out the side of the rocker panels right behind the doors. He had it come through the floor and exit out the sides. He was saying its kida loud inside, but it looks badass:SNSign:

Michael Yount · Dec 24, 2005

Not side exit, but definitely different.....OEM Boss 429/302 muffler....

http://www.stangcity.com/showphoto.php/photo/2157/cat/500/page/1

qcrun98 · Dec 24, 2005

so I see that there are actually people that read forums for the single purpose to be smart a@@'s. But ohwell. Thanks for the comments and suggestions I have got some very good ideas from a couple of links. That t-bird does look bad a@@.

qcrun98 · Dec 24, 2005

That volvo is cool there was a guy from where I am from that dropped a 302 in his volvo (same body style). It sure was funny seeing people laugh at him right before he stomped them.

RyanSG · Dec 24, 2005

yeah i have my fox side piped. comes off the stock h pipe or in my case x-pipe into 2 summit glass packs and then about an inch out in front of the tire. Looks and sounds awsome with the turbo. Redoin it all this winter so we'll see how the new setup sounds, but it's stayen side piped cas i love it! I got vid of it at idle N stuff if you guys would like to hear it let me know.

qcrun98 · Dec 24, 2005

I would love to hear the sounds wav's you have. Do you have any pics of the side exhaust you can post?

RyanSG · Dec 25, 2005

OK i got a link for the vid just click it and i'll open up a page with media player etc and play it. Don't mind the crappy tips cas it was snowing when i finally got it runnen so there all crapped up. Once i get em all leaned up they'll shine like chrome again. Looks sweet when they are all shinned up ppl love em thats one of the first things they notice (after the intercooler )

http://videos.streetfire.net/player.aspx?fileid=10CB062B-E615-4B82-8E04-AE449FF25EB8

ExplodingGopher · Dec 25, 2005

I used to have a homemade side exit system on my car before the lifter collapsed in the 5.0, the setup had an offroad H, shorty headers, flowmaster 1 chambers, box tips, motor had a b303 cam. Im currently producing a similar but better looking setup for the big block.

Heres a sound clip of the side exit with flow 1 chambers on the 5.0: http://www.northcoastmusclecar.com/CCV/1.wav

Heres some pics of the setup:

RacEoHolic330 · Dec 25, 2005

Car sounds great Ryan. I need to stop by sometime and check out your ride.

393Bird · Dec 25, 2005

Where there is the will, there is a way. I have always loved side exit exhaust, but with my Bird being lowered, I had to work out a way to do it with out ground clearance problems.

Here is how it ended up.

JamesB88 · Dec 25, 2005

I was going to run something like that on my car, I started making it but stoped. I got it to where it was at the right spot but didnt put tips on it to put it out, it would of looked funny, and i didnt like the bending the pipe in a U shape to make it work. Ive got dumps on my car and i had flex pipe over them and out to the side, but now im just gonna go with a cobra bumper and tips.

Michael Yount · Dec 25, 2005

Spin Tech makes a muffler that has the inlets and outlets at 90 angles to each other -- in other words, the outlet already points towards the side of the car. So no "U" pipe is required.

RacEoHolic330 · Dec 25, 2005

393bird, that's a really trick way of doing it. very nice job man.

89 Mustang GT Side Exhaust ?

qcrun98

Member

RacEoHolic330

I like to dress like a pretty girl

qcrun98

Member

Michael Yount

Mustang Master

qcrun98

Member

qcrun98

Member

sgarlic

carbed 85 gt

New Member

Michael Yount

Mustang Master

qcrun98

Member

qcrun98

Member

RyanSG

qcrun98

Member

RyanSG

ExplodingGopher

New Member

RacEoHolic330

I like to dress like a pretty girl

393Bird

Attachments

JamesB88

Member

Michael Yount

Mustang Master

RacEoHolic330

I like to dress like a pretty girl

Similar threads

89 Mustang GT Side Exhaust ?

Member

I like to dress like a pretty girl

Member

Mustang Master

Member

Member

New Member

Mustang Master

Member

Member

Member

New Member

I like to dress like a pretty girl

Attachments

Member

Mustang Master

I like to dress like a pretty girl

Similar threads

Privacy & Transparency

Privacy & Transparency